Newbie in the NW.

Welcome to KDXRider.net! Please take a moment to introduce yourself, and meet the group.
Post Reply
jaredk253@gmail.com
Member
Posts: 1
Joined: 04:43 pm Jul 08 2025
Country: PNW USA

Newbie in the NW.

Post by jaredk253@gmail.com »

Hello folks. Thanks for having me and I am looking forward to digging through your forum. After 20 years of riding street I finally got my first dirt bike and I am stoked. It’s a 2005 KDX 200. The previous owner had it plated and set up with a Baja Designs headlight system, Speedo pick up off the rear wheel, brake lights and rear turn signals. Most of that wasn’t working so I removed it and getting back to square one and then I’ll re assess if I want to plate it and make it work. Looks like the fender are from a MX bike. Looking forward to getting out on the trail.

See you all around,
Jared.
Attachments
IMG_4838.jpeg
IMG_4838.jpeg (1.5 MiB) Viewed 19768 times
User avatar
SS109
KDXRider.net
KDXRider.net
Posts: 6093
Joined: 05:11 am Aug 23 2009
Country: USA
Location: Tucson, AZ, USA
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Newbie in the NW.

Post by SS109 »

Welcome!
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
User avatar
billie_morini
Gold Member
Gold Member
Posts: 578
Joined: 04:31 pm Aug 02 2020
Country: Central Coast California
Has thanked: 2 times
Been thanked: 2 times

Re: Newbie in the NW.

Post by billie_morini »

Jared, this looks like a very nice dirt bike.

I bought a KDX 220 about 4 years ago from a teenager in Arizona. He installed a Tusk lighting kit with LEDs and small battery that ran everything except the headlight. He installed a two beam aftermarket headlight that was powered from the lighting coil like the OEM light. The bike was registered & plated. Once home with the bike, I rewired some of wht the previous owner did. Notable changes involved adding switches to turn off all lights, pressure activated brake light switch to front to provide switch on both brakes, and revising headlamp wiring to run the high beam and not just the low beam.

I like having a registered & plated dirt bike. It makes it easy to get on roads to access dirt trails and allows me to ride in off-road areas that require plated bikes.
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14631
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Has thanked: 2 times
Been thanked: 6 times
Contact:

Re: Newbie in the NW.

Post by KDXGarage »

Welcome. Enjoy your KDX!

The rear fender may be a Maeir brand fender. It is for the KDX, just a non-light rear fender.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
User avatar
Julien D
KDXRider.net
KDXRider.net
Posts: 5890
Joined: 07:53 pm Nov 07 2008
Country: USA
Has thanked: 5 times
Been thanked: 10 times
Contact:

Re: Newbie in the NW.

Post by Julien D »

Great looking bike! Welcome to KDXRIDER!
Image
User avatar
bufftester
Platinum Member
Platinum Member
Posts: 3547
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA
Been thanked: 1 time
Contact:

Re: Newbie in the NW.

Post by bufftester »

If you can keep it plated, do. In the PNW Forest Service doesn't recognize the states regulations that allow non plated bikes to use the state forest roads. If you're on a National Forest road, of which in WA there are like 10 gazillion and you have to use them to link trails, you have to be road legal. Welcome to the wonderful PNW dirt scene!
User avatar
VTMTcowboy
Gold Member
Gold Member
Posts: 586
Joined: 07:50 pm May 26 2017
Country: USA

Re: Newbie in the NW.

Post by VTMTcowboy »

Welcome to the tribe! You are going to love that 200. Keep the plate if you can, nice to be able to ride roads legally to connect as others mentioned. Regardless, enjoy the bike and enjoy all the great info and people on this forum. Best one out there in my opinion!
1997 KDX 220
2004 KDX 200
Post Reply