1983 kdx 200
-
NinjaSkunkApe
- Member
- Posts: 2
- Joined: 12:32 am Feb 04 2014
- Country:
1983 kdx 200
Picking up a 1983 kdx 200 tomorrow . I will have pics then. But what I do know is it may need clutch work and top end. Any words of wisdom? Things to look for and so on?
-
tymes
- Member
- Posts: 17
- Joined: 08:57 pm Sep 01 2013
- Country:
Re: 1983 kdx 200
Get a flywheel puller off ebay, remove the flywheel and check the magnets are still on the flywheel nice and tight, they come loose and destroy the coils.
-
mtbill
- Member
- Posts: 23
- Joined: 02:43 pm Sep 24 2013
- Country:
1983 kdx 200
I just finished my '84. Piston rings are almost impossible to find. '86 & newer won't fit. One guy is selling a new, German made, piston/ring set on E-bay for $199.
Pay close attention to all the thrust washers when pulling the clutch. There's one for the clutch, idler sprocket & kick starter mechanism. Have fun!!
Pay close attention to all the thrust washers when pulling the clutch. There's one for the clutch, idler sprocket & kick starter mechanism. Have fun!!
-
KDXGarage
- KDXRider.net
- Posts: 14599
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1983 kdx 200
NinjaSkunkApe, did you get the bike?
Thank you for participating on kdxrider.net. 
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128