RB and the 200

Post by **it175** » 01:15 pm Sep 20 2007

Lot's of positive's on the RB work on the 220, but what would be the best mod's for the 200. I WILL be getting the AS shortly and DF3's but any other recemendations.

Post by **scheckaet** » 01:16 pm Sep 20 2007

RB and torque pipe

strider80 · Post by **strider80** » 01:40 pm Sep 20 2007

I have a RB modded stock carb and head on my 200, with a desert pipe. Works awesome, plenty of low end for my trials tires (does not bog at all due to the hook up).

Jeb · Post by **Jeb** » 03:19 pm Sep 20 2007

Either of the above . . . and then replace the 200 jug, lid, and piston assy with 220 parts

Post by **Indawoods** » 03:59 pm Sep 20 2007

I have the carb and head mod on mine.... she's a beast! Running a FMF torque pipe and 13/50 gearing.... and she will rip in the woods or in the field. Just awesome....

Post by **it175** » 07:06 am Sep 21 2007

I curently have the FMF torque pipe now, and was thinking about gitting the rev pipe. Inda, What type of head mod is it? Do you run any special fuel.
I use Amsoil Intercepter at 50:1 and 1 qt of toluene to 5 gallons of premium.

Post by **Indawoods** » 07:35 am Sep 21 2007

Your running about what I am running. The RBD head mod give you some more compression and the squish band is recut to get more of a complete burn.... it's a nice final touch!

Green Hornet · Post by **Green Hornet** » 11:58 am Sep 24 2007

Jeb wrote:Either of the above . . . and then replace the 200 jug, lid, and piston assy with 220 parts

YEP!!! Those 2Hunnys are for school girls

Post by **scheckaet** » 12:46 pm Sep 24 2007

Green Hornet wrote:
Jeb wrote:Either of the above . . . and then replace the 200 jug, lid, and piston assy with 220 parts
YEP!!! Those 2Hunnys are for school girls

Post by **fuzzy** » 12:55 pm Sep 24 2007

RB's carb work will benefit ANY bike w/ a PWK. I think he does some work onthe 'Kuni's too.

Post by **it175** » 07:54 pm Sep 25 2007

Green Hornet wrote:
Jeb wrote:Either of the above . . . and then replace the 200 jug, lid, and piston assy with 220 parts
YEP!!! Those 2Hunnys are for school girls

AH!! AH !!! Come on now

This is what I don't need.

2001kdx · Post by **2001kdx** » 08:19 pm Sep 25 2007

fuzzy wrote:RB's carb work will benefit ANY bike w/ a PWK. I think he does some work onthe 'Kuni's too.

You think he could do something with a 38mm RM carb?

Post by **fuzzy** » 09:40 am Sep 26 2007

Yes, I'm sure......Including making a 36mm for it that'll blow your mind ;)

KDXRIDER.NET

KDXRIDER.NET

RB and the 200

RB and the 200