Had to cut slots for a blade bit and used a hammer impact wrench .....after recessed hex head got rounded out.
Caliper hanger pin removal solution
-
bultaco4ever
- Supporting Member I
- Posts: 267
- Joined: 04:37 pm Sep 24 2015
- Country:
Caliper hanger pin removal solution
http://www.kdxrider.net/forums/gallery/ ... age_id=548
Had to cut slots for a blade bit and used a hammer impact wrench .....after recessed hex head got rounded out.
Had to cut slots for a blade bit and used a hammer impact wrench .....after recessed hex head got rounded out.
-
bultaco4ever
- Supporting Member I
- Posts: 267
- Joined: 04:37 pm Sep 24 2015
- Country:
Re: Caliper hanger pin removal solution
[imghttp://www.kdxrider.net/forums/gallery/image.p ... age_id=549][/img]
Can you see the grooves on the pin?
Can you see the grooves on the pin?
-
canamfan
- Supporting Member II
- Posts: 444
- Joined: 09:55 pm May 08 2011
- Country:
- Location: butler mo USA
Caliper hanger pin removal solution
I think I'll try your method rather then drilling and retapping, I've got a good impact driver. Thanks