My 1984 petcock is leaking and needs to be rebuilt or replaced. I can only find one solution so far which is an aftermarket version from a KXT Tecate specialist.
Any suggestions on finding replacement "packing" or o- ring for this petcock?
Thanks,
Moseley
1983-1985 Fuel Petcock rebuild or replacement
-
moseleykmc
- Member
- Posts: 6
- Joined: 08:39 am Aug 29 2014
- Country:
-
KDXGarage
- KDXRider.net
- Posts: 14667
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Has thanked: 48 times
- Been thanked: 15 times
- Contact:
Re: 1983-1985 Fuel Petcock rebuild or replacement
Hi. Welcome to the forums. Any chance you could post a picture of it?
If it helps, according to the Kawasaki site, here are the 10 models that used that petcock.
Model (10):
KDX200-A1 (KDX200) (1983)
KDX200-A2 (KDX200) (1984)
KDX200-A3 (KDX200) (1985)
KDX250-B2 (KDX250) (1982)
KDX250-B3 (KDX250) (1983)
KDX250-B4 (KDX250) (1984)
KXT250-A1 (Tecate) (1984)
KXT250-A2 (Tecate) (1985)
KXT250-B1 (Tecate) (1986)
KXT250-B2 (Tecate) (1987)
If it helps, according to the Kawasaki site, here are the 10 models that used that petcock.
Model (10):
KDX200-A1 (KDX200) (1983)
KDX200-A2 (KDX200) (1984)
KDX200-A3 (KDX200) (1985)
KDX250-B2 (KDX250) (1982)
KDX250-B3 (KDX250) (1983)
KDX250-B4 (KDX250) (1984)
KXT250-A1 (Tecate) (1984)
KXT250-A2 (Tecate) (1985)
KXT250-B1 (Tecate) (1986)
KXT250-B2 (Tecate) (1987)
Thank you for participating on kdxrider.net. 
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
kx200
- Supporting Member I
- Posts: 242
- Joined: 08:30 pm Dec 02 2013
- Country:
- Location: Iowa
1983-1985 Fuel Petcock rebuild or replacement
parts unlimited has rebuild kits. I bought a Yamaha one to fit my 94kx tank. http://www.parts-unlimited.com/products ... tId=196280