does UFO enduro fender have a plate light?

breakdirt916 · Post by **breakdirt916** » 10:00 am Jun 30 2014

My bike doesn't have the light, and it looks cheaper and easier to buy the whole thing with a brakelight rather than modify a socket in the stock taillight

I can't get a good look in the picture - does the UFO fender have a license plate light too?

http://www.ebay.com/itm/UFO-Plastics-En ... 4c&vxp=mtr

jjavaman · Post by **jjavaman** » 10:39 am Jun 30 2014

I bought one for my 220 and it has a dual filament bulb and had 3 wires coming out of it. I've just used 2 of the wires and taped off the other one. Does that help?

diymirage · Post by **diymirage** » 05:38 pm Jun 30 2014

is it the plate light you want or the brake light ?

if all you are concerned about is the brake light then you can just order an 1157 socket off ebay and a hydraulic brake light switch and modify the stock unit

$6 dollars in parts and maybe 30 minutes of work and your good to go

breakdirt916 · Post by **breakdirt916** » 01:56 am Jul 02 2014

to clarify - I'm curious if it has a plate light

ie. is the bottom of the red lens clear, so that it will illuminate a license plate?

I also considered the 1157 socket swap...but my bike doesn't even have the red taillight on there at all...it's just the fender.

diymirage · Post by **diymirage** » 05:31 am Jul 02 2014

no light on the fender at all ?

shoot me a picture, I might have a stock fender I would consider trading for it
(id have to check to see if the lens is red or not)

or you can buy an LED tail/brake/plate light that mount under the fender off ebay for 12 bucks and wire that in
that's what I have on my plated bike and it looks pretty good...I think

3j3j3j · Post by **3j3j3j** » 12:25 pm Jul 02 2014

A buddy just bought this fender and yes, the bottom is clear to light up a license plate

yamamunn · Post by **yamamunn** » 09:40 pm Jul 03 2014

jjavaman wrote:I bought one for my 220 and it has a dual filament bulb and had 3 wires coming out of it. I've just used 2 of the wires and taped off the other one. Does that help?

what 2 wires did you use as the colors dont match my stock wireing

3j3j3j · Post by **3j3j3j** » 11:59 pm Jul 03 2014

yamamunn wrote:
jjavaman wrote:I bought one for my 220 and it has a dual filament bulb and had 3 wires coming out of it. I've just used 2 of the wires and taped off the other one. Does that help?
what 2 wires did you use as the colors dont match my stock wireing

My friend used the brown as ground and one of the whites (wrapped in yellow???) For the hot.

KDXRIDER.NET

KDXRIDER.NET