KDXRIDER.NET

The flat head adjuster is stripped out on my rear shock. I have a full replacement for it. Also the replacement one came off another shock. I didn’t drill out the peening It just broke loose and came out really smooth anyways. Just wondering if I should use any thread sealer when reinstalling my replacement. Thanks

Make sure the threads are OK before putting it in.

No thread sealant necessary. Lube the two orings.

KDXGarage wrote: 10:46 pm Jan 30 2023 Make sure the threads are OK before putting it in.

No thread sealant necessary. Lube the two orings.

Thank you

KDXGarage wrote: 10:46 pm Jan 30 2023 Make sure the threads are OK before putting it in.

No thread sealant necessary. Lube the two orings.

One more thing. I can’t find the piston band anywhere. Can I get away without replacing it?

Piston bands are available from places like SDI, technical touch, etc.

You need the band and the o-ring underneath it, 44 mm. There is just one o-ring. Look up Technical Touch.

KDXGarage wrote: 01:30 pm Jan 31 2023 You need the band and the o-ring underneath it, 44 mm. There is just one o-ring. Look up Technical Touch.

I went on to their site yesterday and punched in both the e series and h series and none were available to each. Should’ve mentioned that earlier. But knowing that it’s a 44mm band is helpful. Just need to know the rest of the dimensions. Thanks

JZ05220r wrote: 03:42 pm Jan 31 2023

KDXGarage wrote: 01:30 pm Jan 31 2023 You need the band and the o-ring underneath it, 44 mm. There is just one o-ring. Look up Technical Touch.

I went on to their site yesterday and punched in both the e series and h series and none were available to each. Should’ve mentioned that earlier. But knowing that it’s a 44mm band is helpful. Just need to know the rest of the dimensions. Thanks

Don’t worry about what bike a shock was fitted to. Just like KYB 46’s are the same basic fork no matter what bike they came on, so to are the shocks.

Slick_Nick wrote: 06:12 pm Jan 31 2023

JZ05220r wrote: 03:42 pm Jan 31 2023

KDXGarage wrote: 01:30 pm Jan 31 2023 You need the band and the o-ring underneath it, 44 mm. There is just one o-ring. Look up Technical Touch.

I went on to their site yesterday and punched in both the e series and h series and none were available to each. Should’ve mentioned that earlier. But knowing that it’s a 44mm band is helpful. Just need to know the rest of the dimensions. Thanks

Don’t worry about what bike a shock was fitted to. Just like KYB 46’s are the same basic fork no matter what bike they came on, so to are the shocks.

Makes sense. Still looking regardless. Thank you.

Would you be interested in a full rebuild kit?

viewtopic.php?f=69&p=223290#p223290

KDXGarage wrote: 04:23 am Feb 02 2023 Would you be interested in a full rebuild kit?

viewtopic.php?f=69&p=223290#p223290

Yes, actually let me make sure my moto sport order cancels then I’ll get back to you. Thanks

Sounds good. Just e-mail me when you are ready. I have all the parts here.