Page 1 of 1

JD red or CEK....

Posted: 02:23 pm Oct 05 2010
by HRDROKN
Any thoughts on whether to run the Ron Black supplied CEK or the JD red needle that I was running prior to th carb and head work?

:rolleyes:

Posted: 02:24 pm Oct 05 2010
by Indawoods
I am running a RED with the RB carb... I love it! It is very linear though... More like a DEK. A CEK is like a Bronco....

Posted: 02:49 pm Oct 06 2010
by HRDROKN
>|<>QBB<
Indawoods wrote:I am running a RED with the RB carb... I love it! It is very linear though... More like a DEK. A CEK is like a Bronco....
Did RB set you up with a 40 pilot? I was running a 42 and if my memory serves me correctly I was considering trying a 40 as I was just a tad fat still.

Posted: 03:38 pm Oct 06 2010
by Indawoods
It's been so long I don't remember. I think he he sends what is good for your area.... I am pretty sure I am running a 42 right now....

Posted: 10:17 pm Oct 06 2010
by Slick_Nick
I was running a 35 pilot stock, and when I got my carb back from RB he upped it to a 38. I tried the 35 again, it was too lean.

Posted: 10:19 pm Oct 06 2010
by Indawoods
You have a 220 dude. When RB'd you should run 200 jetting... 38 is fine in real hot weather... but not this time of year...

Posted: 12:50 am Oct 07 2010
by Slick_Nick
My city is at 4000', and I ride up to 9000'. Needs to be a bit thinner than most.

Posted: 12:52 am Oct 07 2010
by Indawoods
Proly a bit... where is your city?

It is hard enough to help without not knowing key info... :neutral:

Posted: 08:21 pm Oct 08 2010
by Slick_Nick
Calgary, AB.