Page 1 of 1

Broken triple clamp-S.O.S.

Posted: 07:00 pm Sep 29 2008
by bigene
HELP!!! I just broke the top triple clamp on my '04 KDX220, just by snugging it up prior to torquing it up. I don't want the same weak/flimsy stock clamp, any ideas would be a huge help. I'm thinking Protaper or some other aftermarket part, but just can't find anything. Thanks in advance---

Posted: 10:18 am Sep 30 2008
by Colorado Mike
I have never seen an aftermarket KDX upper triple, nor have I seen a broken stocker. The lowers fail when people try to press the stem out the wrong way.

If you end up not finding an aftermarket one, I probably have a stock one for pretty cheap if you want it. It happens to be off an '04 as well.

Posted: 05:06 pm Oct 01 2008
by bigene
Thanks Mike, I found a used one at FRP and Jeff sent it right out- I kind of panicked cause I have a race next weekend and couldn't find an after market clamp- next time, nothing but a torque wrench- thanks again

Posted: 08:12 pm Oct 01 2008
by rick albert
try TOPAR RACING AND ASK FOR LARRY,they will make you anything you want ............. :wink:

Posted: 07:07 pm Oct 04 2008
by danfree
>|<>QBB<
Colorado Mike wrote:I have never seen an aftermarket KDX upper triple, nor have I seen a broken stocker. The lowers fail when people try to press the stem out the wrong way.

If you end up not finding an aftermarket one, I probably have a stock one for pretty cheap if you want it. It happens to be off an '04 as well.
I purchased an upper triple clamp and steering damper from Scott's as a set. It was probably too expensive, but it looks really good. I have a 2005 KDX 200, so I'm not sure if it is the same as the 220. If anyone is looking for a stock upper, I have one plus the stock bars and mounts. I upgraded them as well.