Page 1 of 1
Now Adding Legal Tailight on KDX
Posted: 10:50 am Mar 02 2008
by AtomicKDX
Does this taillight work/fit the stock KDX fender? My brake/tail light works, but now wishing to add this legal looking tailight w/ license plate.
http://www.motorcycle-superstore.com/2/ ... light.aspx
Posted: 10:52 am Mar 02 2008
by Ondatrail
Get a MX fender with it. Looks alot better IMO.
Posted: 02:54 am Mar 09 2008
by kuci
what the hell
Posted: 08:27 am Mar 09 2008
by blimpman
This is the one I use on my KDX with a MX fender. It is from BAJA Designs. Part number 600709
Posted: 09:15 pm Mar 09 2008
by AtomicKDX
Thanks. Does the light run off the 12V from the KDX regulator? Or do you have to add other components like a rectifier?
>|QBB<[/url]
blimpman wrote:This is the one I use on my KDX with a MX fender. It is from BAJA Designs. Part number 600709
Posted: 10:06 pm Mar 09 2008
by Indawoods
Works fine with the stock setup.
Posted: 09:00 am Mar 10 2008
by blimpman
Indawoods wrote:Works fine with the stock setup.
Stock tail-light wires are what i used. The BD tail-light didn't fit real well on the stock fender so i installed the MX fender. Looks pretty good. The brake light switch that is used instead of the banjo bolt on the master cylinder was a bit of a pain to install because of bracket clearance.
Posted: 02:13 pm Apr 05 2008
by blimpman
Here is my bike... Now street legal ( barely) and ready to ride some enduros. I have some surgery to get over and then I'll be ready...
13/47
2 " lowering links
ROX risers
Woods Pipe - FMF silencer
Amsoil Interceptor 32-1 w/CAM2 110 Octane
Type F / 10w-40 (2:1) Gear Oil
S-12 front and back - In the garage ready to go.
