Page 1 of 1
1992 KDX200SR vs. 92 KDX200
Posted: 09:06 pm Jan 15 2008
by jeopardy98
I keep looking up front brakes for my 92 and the only listings that show up for 89-92 are the KDX200SR which after some research I found was an enduro type bike only sold in the UK. It had a steel tank, speedometer, and other goodies but I don't know if the brakes are the same for both models. Even OEM parts places list the 89-92 front pads as discontinued. This is driving me crazy.
Posted: 09:32 pm Jan 15 2008
by Indawoods
Posted: 10:02 pm Jan 15 2008
by jeopardy98
That's exactly what I needed. It looks like I will be ordering quite a few things from those people. Thanks a ton.
Is there a trick to fork seals or do I need to break down and buy a driver tool?
Posted: 10:04 pm Jan 15 2008
by Indawoods
Driver is a good tool to have... but you can use PVC to make yourself one.
Posted: 10:18 pm Jan 15 2008
by Colorado Mike
I just used the old seal as a driver by cutting it and holding it above the new seal and carefully bumped it in place with a plastic shot-filled mallet. a seal driver would be nice though, I think Tusk makes one a good bit cheaper than the Motion Pro ones. RM sells a lot of the Tusk products.
Posted: 10:25 pm Jan 15 2008
by jeopardy98
PVC sounds like a plan. Good idea.
Posted: 10:25 pm Jan 15 2008
by Indawoods
Colorado Mike wrote: RM sells a lot of the Tusk products.
Proly 'cause they own it!
