KDXRIDER.NET

Hey guys, any idea where I can get a new kicker for a decent $? I can get one from Bike Bandit for $81 and From Ron Ayers for $70. Both OEM of course. Just wondering if you guys new of an aftermarket one that was inexpensive. Its for a 91 KDX 250. Thanks, Rick.

Did you try http://www.frpoffroad.com

Yep. Thanks

Any other ideas/places?

eBay?

I keep a watchin, but a notta seeun nutin........

'Is the kickstart shaft for your 250 the same size as the kickstart shaft on Andy's 200? If your 250's shaft is smaller I may have one that could fit for now . . .

I bought a late-90's KX125 kickstarter whose hole is too tight for my shaft . . .

so if your shaft is smaller than Andy's, your's might fit where my shaft won't . . . uh . . . you get the picture

If I had a spare KDX 200 kicker... I'd send it to ya to see if it fit... a KX250 kicker may fit it!

Well, looking at the fish on BB, the 200 and the 250 have different kawi #'s, but look almost identical. If i had to guess, either the shaft size is different, or the arm itself is a little different, due to different expansion chamber design. Maybe I could persuade Andy to take his off for me so I could try it! Shew, small shaft, large shaft, take it off! I'm gettin all warm and fuzzy inside..... ps Inda, I think a kx one would work, if i could find one from 89-94.

Rick when i get back from Florida i will look to see if i still have a kicker off an old kx250. If i do and it will fit you can have it. I should be back Sunday.

I don't recall a KDX 200/220 pretty much anything fitting the 250.

Looks like Inda's nailed it.

Buy it!

Esnipe! Esnipe!

Thanks for the help guys. Im looking into it, ya know, weighing my options.........

It was a 1989 KX125 that worked perfectly on the KDX.

I think i remember seeing it on Canadian Daves, but I'll have to check that...

YUP, check it out under Tech Tips: http://www.dirtrider.net/justkdx/

I just now notice the original poster has a 250. Oops.