KDXRIDER.NET

I believe this is the correct installation of the kips for the E series models Please let me know if im correct, thanks.

http://www.geocities.com/a57ngel/moto/kips3.html

Yes this is correct.

But do not do that

**If you get tired of replacing these valves once or twice a year then just do as I did and glue the broken ones in the open position with epoxy glue**

But I dont want to lose bottom end power

Which is probably why he said:

But do not do that

After it's all put together, check it to make sure:

1. It opens and closes as it should.

2. The subvalves and main flapper are aligned/timed as they should be.

ok thanks