KDXRIDER.NET

I bought a rear shock on ebay.This is a 92 kdx200 shock. I know nothing in shock. The seller is a dealer and he do not know if the shock was serviced. I received it today.


The shock was dirty with dry mud but no sign or stains of oil anywhere.The shaft is good and no chips or dents.I give screwdriver hit on the gas valve and i heard a lillte psiiifff. The shock have no foam/ rubber bumper. The bottom adjust scrwe was stuck.I tried to move her. And now I hear clicks but many clics...the screw is free ...I can turn the screw for hours! Mabe the screw is broke?

The adjust screw on the shock gas bottle works good.

My question: is there a way to know the condition of a shock without dissasembly?

Do the broken adjust screw can hurt someting? maybe we can not adjust the screw but she is on the 16 clic range anyway?

Can we run a bike witout a shock bottom bumper??

The shock seem to work good but i do not know shocks.

Witch tool is used to measure the amout of nitrogen in the shock?

Look at my wonderful test http://s82.photobucket.com/albums/j259/ ... 007002.flv

I guess I would just send it off for an oil change and nitrogen recharge. There is very little nitrogen in there, anyway. I don't think you can test the nitrogen pressure without loosing most of it.

Karl

just open it up yourself, clean the parts, refill with fresh oil and have a shop refill the N2. It's really easy to tear it down, (the hard part is removing the shock from the bike) if I can do it then anybody can. watch out for the snap ring, one is bigger than the other.

scheckaet wrote:just open it up yourself, clean the parts, refill with fresh oil and have a shop refill the N2. It's really easy to tear it down, (the hard part is removing the shock from the bike) if I can do it then anybody can. watch out for the snap ring, one is bigger than the other.

agreed, just pop it open and check it out.

ryan, you still selling the 220?