KDXRIDER.NET

The time has come to torque my head and cylinder does somone have the torque settings, thanks. Mines a 200

they are in the book if you have it. I dont have mine at work or i would give them too you.

They are probably in the book but me dont have book if you gimme the torque setting when you get home that would much appreciated thanks.

Cylinder Head Nuts 18 ft/lb
Cylinder Nuts 18 ft/lb
Engine Mounting Nuts 33 ft/lb
Engine Mounting Bracket Bolts 22 ft/lb

Hard to get to the cylinder nuts without an adapter. MotionPro makes one. No need to figure torque value differences as long as you keep the adapter at 90º to your torque wrench.

I just removed the tank. its 2 screws and a rubber strap.

That works for the head bolts but not the cylinder bolts.

xagentman wrote:I just removed the tank. its 2 screws and a rubber strap.

I will assume there is a meaning to this that I am too dense to understand.

Rephrase, please?

What do the tank, two screws and a rubber strap have to do with access to the cylinder nuts with a torque implement?

Thanks.

disreguard. I need to "read" and not skim the post. *sigh*

No problem.

I've been guilty more'n once of missing something as plain as the nose on my face. Why then assume it's NOT my misunderstanding?

Cheers!