For KDX175 IMS Recommends
Posted: 01:04 pm Nov 08 2021
Contacted IMS to get the fit for KDX175 foot pegs and this is what I got back:
From what I see is the 1981 KDX175 foot peg uses a 8mm diameter pivot pin. Parts schematic I looked at on http://bikebandit.com show the return spring sits around a small barrel on the bsck/bottom side of the mount on your OEM foot peg. This looks just like IMS Products part # 273116, Super Stock, 93116-4 IMS Pro Series, 343116-M Core MX and 343116-E Core Enduro foot pegs. Code 3116 is one of the applications IMS Products supplies return springs.
All IMS Products foot pegs are cast 17-4 Stainless steel Super Stock least aggressive with Pro Series Most aggressive. Core MX and Core Enduro have excellent grip Core Enduro may be a little longer than you want see dimensions on IMS Products web site http://www.imsproducts.com.
I ordered the core enduro and will report back when I get them in my grubby hands.
From what I see is the 1981 KDX175 foot peg uses a 8mm diameter pivot pin. Parts schematic I looked at on http://bikebandit.com show the return spring sits around a small barrel on the bsck/bottom side of the mount on your OEM foot peg. This looks just like IMS Products part # 273116, Super Stock, 93116-4 IMS Pro Series, 343116-M Core MX and 343116-E Core Enduro foot pegs. Code 3116 is one of the applications IMS Products supplies return springs.
All IMS Products foot pegs are cast 17-4 Stainless steel Super Stock least aggressive with Pro Series Most aggressive. Core MX and Core Enduro have excellent grip Core Enduro may be a little longer than you want see dimensions on IMS Products web site http://www.imsproducts.com.
I ordered the core enduro and will report back when I get them in my grubby hands.