KDXRIDER.NET

Posted: **06:01 pm Nov 17 2019**

98 kdx200. Probably make a hybrid out of it. I have an 03 kx125 with a worn jug I may use. Haven’t had a bike in about 12 years. Compression reads 175psi which was a surprise. Had a torn reed cage gasket, once I fixed that it ran waaaaaaaaaay rich with a 165 main, and a 55 pilot. Put in a 40 pilot and 150 main ran a lot better but then we got snow so it’s in the garage for the next six months.

: 0D899192-F4C5-4359-94ED-B2AB53E8FF2D.jpeg (1.77 MiB) Viewed 3166 times

: A6BE72C6-614C-43D8-89A5-238EE0E76910.jpeg (1.84 MiB) Viewed 3166 times

: 484C1C1F-EEEB-42BF-A886-F601B81C7E8B.jpeg (1.67 MiB) Viewed 3166 times

Posted: **07:49 pm Nov 17 2019**

Not as bad as some I have seen! Good luck on it however you decide to go.

Posted: **08:22 pm Nov 17 2019**

Nice. What’s up with the two tone frame? Spray paint? That one radiator looks like it’s about to tap out.

Posted: **08:27 pm Nov 17 2019**

Yup he bombed the plastics and some of the frame with spray paint. Both rads are pretty shot but don’t leak and actually aren’t bent. If I spend some time making the fins straight they will work.

Posted: **08:32 pm Nov 17 2019**

I think I am going to ride this for a season and get it running the way I want. Then when I build the hybrid I’ll just have to pretty it up with some cerakote and go.

Posted: **06:52 pm Nov 18 2019**

Welcome to the forums.

Posted: **11:06 pm Jan 03 2020**

Perfect bike for a frame up rebuild

KDXRIDER.NET

Picked up this hoopty

Picked up this hoopty

Re: Picked up this hoopty

Re: Picked up this hoopty

Re: Picked up this hoopty

Re: Picked up this hoopty

Re: Picked up this hoopty

Re: Picked up this hoopty