first KDX200
Posted: 03:11 pm Jul 05 2016
i picked up a well used 1990 kdx200 for my stepson to ride. I've been riding myself since the 70's and have always liked these bikes. i just never ended up with one until now.
the kdx so far needed headset bearings, rear wheel bearings, shock mount bearings, and swingarm bearings.
i serviced the forks and shock. they still had the stock oil in them and the fork seals were blown. i rebuilt the front brake caliper, and it looks like i will need to rebuild the top end too. it blew only 124psi and i looked through the intake and the piston is scored up pretty bad.
anyway. i'll be asking some questions. have been lurking here for about 2 months now.
the kdx so far needed headset bearings, rear wheel bearings, shock mount bearings, and swingarm bearings.
i serviced the forks and shock. they still had the stock oil in them and the fork seals were blown. i rebuilt the front brake caliper, and it looks like i will need to rebuild the top end too. it blew only 124psi and i looked through the intake and the piston is scored up pretty bad.
anyway. i'll be asking some questions. have been lurking here for about 2 months now.