KDXRIDER.NET

hi guys im in the middle of rebuilding my rm hybrid and am having some issues with the clutch. I filed the basket and followed a diagram when putting together. when its all together it either feels like neutral doesnt want to work. (it feels like its almost in gear). so i will try again and then sometimes the clutch wont even want to work , but then neutral is fine. im sorry if im not explaining this very well but any help would be greatly appreciative. thanks!

when i say the clutch doesnt want to work i mean it doesnt want to pull in.

Try putting it together like this:

[youtube][/youtube]

Thank you but the link is not working lol

Works for me.

Okay It works now. Its a great video. Thank you

Well im stumped. I followed the video and doing everything correctly. As soon as I start to tighten down the clutch springs neutral starts to feel like is a gear. Whats could be wrong!!?

you might want to try and swap the old springs on for a bit and let the plates work some and then put the new ones back on. I had a horribly hard clutch as in what you said and I think read here somewhere to try that and it worked. It was still somewhat hard for the first couple of times and then felt real good put the new springs back on and was harder to pull clutch but felt good.

Well the fact you have checked its easy to open up and run through it again. Lord knows I have about 30 or so on my first clutch pack replacement.

Something is wrong and I just cant figure it out. Im going to work on my ktm for a while and give this a break haha