XR springs in KDX
Posted: 12:12 pm Feb 13 2012
I had to do fork seals in my 2k 200,and decided to pick up a pair of XR springs to get the front end a little stiffer for me.
The springs are about 4 inches longer than the stock springs.
Do I just use spring and no spacer or what?
And what is the fluid height from top of fork?
I have read several things and ended up going with 100mm from top of fork.
The springs are about 4 inches longer than the stock springs.
Do I just use spring and no spacer or what?
And what is the fluid height from top of fork?
I have read several things and ended up going with 100mm from top of fork.