Fork ID please
-
- Member
- Posts: 19
- Joined: 10:49 pm Jul 01 2021
- Country: United States
Fork ID please
Newb here-I bought a set used forks that the ad stated were supposedly for a 2005 kx250f in hopes to do a future conversion. When I arrived, he stated it was a 2006. For $90 I bought the forks and a (supposedly) kx125 rim with hub and axle/spacers. I was in the middle of a vacation trip so I didn't have the luxury to run numbers while I was there. Upon arriving at my destination, I saw the casting numbers were k312-l2 and k312-r2. I'm thinking that these are actually for a 2002-2003 kx 125 or 250. Anybody with more experience care to comment? I don't have any way to measure as I am on the road. Thanks for any help you can offer.
- SS109
- KDXRider.net
- Posts: 5802
- Joined: 05:11 am Aug 23 2009
- Country: USA
- Location: Tucson, AZ, USA
- Contact:
Re: Fork ID please
Not sure on the casting numbers. Can you take a of the overall forks and a pic of the top of them?
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
- KDXGarage
- KDXRider.net
- Posts: 14084
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Fork ID please
Seek and ye shall find.
AKA - Look on eBay for 2002 KX125 / KX250 forks and see what I saw. 2002
Congratulations on it not being 2006, due to the clamps.
AKA - Look on eBay for 2002 KX125 / KX250 forks and see what I saw. 2002
Congratulations on it not being 2006, due to the clamps.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 19
- Joined: 10:49 pm Jul 01 2021
- Country: United States
Re: Fork ID please
I saw the ebay listings but often find sellers misrepresent items. Here are the images of the forks. I am hoping the congrats comments indicates this wasn't a bad buy. Again, thanks for any clarity as I would like to begin the search for triple clamps.
- Attachments
-
- 20210804_185020.jpg (2.29 MiB) Viewed 4223 times
-
- 20210804_185007.jpg (2.29 MiB) Viewed 4223 times
-
- 20210804_184957.jpg (4.8 MiB) Viewed 4223 times
- KDXGarage
- KDXRider.net
- Posts: 14084
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Fork ID please
They look like 2002 to me.
2006 KX250F has an aluminum frame, so the clamp's steering stops are designed for an aluminum frame, not a steel frame.
2006 KX250F has an aluminum frame, so the clamp's steering stops are designed for an aluminum frame, not a steel frame.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 19
- Joined: 10:49 pm Jul 01 2021
- Country: United States
Re: Fork ID please
Thanks for the confirmation KDXGarage. Would you happen to know what year/ model triple clamps would work i.e. 2001-2002 kx125 or kx250?
- KDXGarage
- KDXRider.net
- Posts: 14084
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Fork ID please
2002 KX125 and KX250 for tighter offset, 2003 - 2007 for slower turning
Can you post a pic of the fork leg where it was mounted? That makes me wonder if it is cracked or aluminum damage.
(last pic, about a foot down)
Can you post a pic of the fork leg where it was mounted? That makes me wonder if it is cracked or aluminum damage.
(last pic, about a foot down)
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 19
- Joined: 10:49 pm Jul 01 2021
- Country: United States
Re: Fork ID please
These pics are all of brake side. The last 2 pics are the same view of the upper and lower portions of the leg in the same orientation as the pic you questioned. I think you may have seen a piece of grass as they have yet to be cleaned as im on vacation. The first pic would be the overall view but 180 degree orientation to the first 2 pics. I hope this makes sense. I thought the finish looked good for the year. A worry I have is investing in the wrong year triple clamps and not having it fit so thank you for the info regarding years.
- Attachments
-
- 20210805_113200.jpg (2.11 MiB) Viewed 4206 times
-
- 20210805_113140.jpg (1.72 MiB) Viewed 4206 times
-
- 20210805_113136.jpg (2.12 MiB) Viewed 4206 times
- KDXGarage
- KDXRider.net
- Posts: 14084
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Fork ID please
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 19
- Joined: 10:49 pm Jul 01 2021
- Country: United States
Re: Fork ID please
Looks like corrosion but this may have become a learning experience for me. Your thoughts?
- Attachments
-
- 20210805_211910.jpg (1.94 MiB) Viewed 4196 times
-
- 20210805_211933.jpg (1.75 MiB) Viewed 4196 times
- bufftester
- Platinum Member
- Posts: 3462
- Joined: 06:03 pm Oct 31 2012
- Country: USA
- Location: University Place, WA
Re: Fork ID please
That's some pretty serious corrosion damage. IIWM I'd be a bit leery about running that fork leg.
- KDXGarage
- KDXRider.net
- Posts: 14084
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Fork ID please
That is damaged and dangerous in my opinion. Do you have a link to the listing?
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 19
- Joined: 10:49 pm Jul 01 2021
- Country: United States
Re: Fork ID please
I think the pics look worse than in person but its obvious I should move on. Here is a screenshot I have
- Attachments
-
- 20210731_233901.jpg (1.5 MiB) Viewed 4190 times
-
- Member
- Posts: 19
- Joined: 10:49 pm Jul 01 2021
- Country: United States
Re: Fork ID please
KDXGarage, would it be possible to pm you links to 2 other sets on eBay for your thoughts? Thanks in advance!
- KDXGarage
- KDXRider.net
- Posts: 14084
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Fork ID please
kdxgarage AT gmail DOT com
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128