Got the wrong color - new project!
-
- Supporting Member
- Posts: 739
- Joined: 08:28 am Apr 21 2019
- Country: United States
- Location: North Cackalack
Re: Got the wrong color - new project!
I’m gonna split the cases and see what’s in there. Not sure if that junk was just from the one hour test ride I did, not noticing that boot being loose, or if this has been over time. If it was sucking in regular air, wouldn’t one expect more scoring in the cylinder? That chip is really the only thing. As far as the head goes, I could send with the cylinder or get another. I’m just gonna continue the tear down and see if these main bearings are crunchy or not.
I like turtles
-
- Supporting Member
- Posts: 739
- Joined: 08:28 am Apr 21 2019
- Country: United States
- Location: North Cackalack
Re: Got the wrong color - new project!
Went ahead and did a conservative tally on a part out just in case
Things usually don’t pass through my hands to die, but at least I know I’m not in a hole (yet)
I’m also keeping a lookout for a parts bike in my area
Things usually don’t pass through my hands to die, but at least I know I’m not in a hole (yet)
I’m also keeping a lookout for a parts bike in my area
I like turtles
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Got the wrong color - new project!
Look on eBay for a used head.
Any chips or flakes on a cylinder wall equals replating.
This Yamaha 4JY-11111-01-00 HEAD, CYLINDER 1 fits the following models and components:
Yamaha Motorcycle 1999 YZ125L1 Cylinder Head
Yamaha Motorcycle 2000 YZ125 - YZ125M1 Cylinder Head
Yamaha Motorcycle 1998 YZ125 - YZ125K1 Cylinder Head
Yamaha Motorcycle 1994 YZ125F1 Cylinder Head
Yamaha Motorcycle 1995 YZ125 - YZ125G1 Cylinder Head
Any chips or flakes on a cylinder wall equals replating.
This Yamaha 4JY-11111-01-00 HEAD, CYLINDER 1 fits the following models and components:
Yamaha Motorcycle 1999 YZ125L1 Cylinder Head
Yamaha Motorcycle 2000 YZ125 - YZ125M1 Cylinder Head
Yamaha Motorcycle 1998 YZ125 - YZ125K1 Cylinder Head
Yamaha Motorcycle 1994 YZ125F1 Cylinder Head
Yamaha Motorcycle 1995 YZ125 - YZ125G1 Cylinder Head
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Supporting Member
- Posts: 739
- Joined: 08:28 am Apr 21 2019
- Country: United States
- Location: North Cackalack
-
- Supporting Member
- Posts: 739
- Joined: 08:28 am Apr 21 2019
- Country: United States
- Location: North Cackalack
Re: Got the wrong color - new project!
Broke it down some more. Looks like an aftermarket basket. From the photo it looks like I might need plates. I do have a good pack sitting at the house. Right side bearing felt concrete from this side. Feeling optimistic, but I’m not forking over any cash until I know what I have. I was optimistic enough to buy some yamabond.
I like turtles
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Got the wrong color - new project!
I would suggest some soap and water before working on a bike.
Any interest to post a VIN and engine number?
Any interest to post a VIN and engine number?
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Supporting Member
- Posts: 739
- Joined: 08:28 am Apr 21 2019
- Country: United States
- Location: North Cackalack
Re: Got the wrong color - new project!
I know off the top of my head the model code is 5DH and the motor serial started with e101c or something. I remember checking the motor to make sure it was the same year as the bike
I like turtles
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Got the wrong color - new project!
Cool. It is good to check all that.
I have seen a few people start buying parts, then later it turned out it was a different year than what they were told or thought.
I have seen a few people start buying parts, then later it turned out it was a different year than what they were told or thought.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Supporting Member
- Posts: 739
- Joined: 08:28 am Apr 21 2019
- Country: United States
- Location: North Cackalack
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Got the wrong color - new project!
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Supporting Member
- Posts: 739
- Joined: 08:28 am Apr 21 2019
- Country: United States
- Location: North Cackalack
Re: Got the wrong color - new project!
Is there a picture in there? I don’t see anything
Never mind, quoted you and grabbed the link. Thanks for the heads up.
Never mind, quoted you and grabbed the link. Thanks for the heads up.
I like turtles
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Got the wrong color - new project!
I posted a link. It came up as some small version of the actual ad, like a picture. I don't know how it did that.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Supporting Member
- Posts: 739
- Joined: 08:28 am Apr 21 2019
- Country: United States
- Location: North Cackalack
Re: Got the wrong color - new project!
Got the cases split today - fun stuff to come.
I like turtles
-
- Supporting Member
- Posts: 739
- Joined: 08:28 am Apr 21 2019
- Country: United States
- Location: North Cackalack
Re: Got the wrong color - new project!
I ended up finishing this project last month. I just put a better rim on the back.
- Attachments
-
- DBE69289-17C9-483A-8B93-CD0F0711ACD8.jpeg (3.75 MiB) Viewed 7302 times
-
- 6F55950D-48F9-4A1F-B808-7E359FF4F625.jpeg (1.68 MiB) Viewed 7302 times
I like turtles
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Got the wrong color - new project!
SHINY!!
Congratulations on getting it going!
Congratulations on getting it going!
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
- VTMTcowboy
- Gold Member
- Posts: 580
- Joined: 07:50 pm May 26 2017
- Country: USA