Yoooo what's up guys,
I'm finishing up the restoration job on my 2002 KDX 200 and am down to the last few things I need to replace which includes a cracked throttle tube. I found a few plastic replacements, but also noticed there is a moose billet throttle tube for the KDX line that looked interesting as I've never had an issue with my Zeta billet tube on my DRZ400S.
Has anyone tried the moose billet throttle tube on their KDX and have any feedback, good or bad, that you can share?
Thanks!!
Moose Billet Throtle Tube
-
- Member
- Posts: 37
- Joined: 11:59 am Aug 17 2017
- Country: United States
- Location: Ohio
- Molly's 70
- Platinum Member
- Posts: 568
- Joined: 04:29 pm Jun 18 2017
- Country: USA
- Location: Wichita, Kansas USA
Re: Moose Billet Throtle Tube
How much is the part?
If you lend someone $20, and never see that person again, it was probably worth it.
-
- Member
- Posts: 37
- Joined: 11:59 am Aug 17 2017
- Country: United States
- Location: Ohio
Re: Moose Billet Throtle Tube
Around $40, so just a bit more over the cost of the stock tube at my local dealer which will run me about $36 for the throttle tube and wheel (46019-1054 and 59101-1103)
- B737driver
- Gold Member
- Posts: 491
- Joined: 01:11 pm Dec 02 2011
- Country:
- Location: Heath, Texas
Re: Moose Billet Throtle Tube
I switched to these grips a while back and will never mess with glue again. They include the throttle tube. Just another option for you.
http://odigrips.com/store/emig-v2-lock-on-grips-2701
You will have to purchase the cam separately....see the application guide.
http://odigrips.com/store/emig-v2-lock-on-grips-2701
You will have to purchase the cam separately....see the application guide.
Live to Fly
Fly to Live
Fly to Live
- B737driver
- Gold Member
- Posts: 491
- Joined: 01:11 pm Dec 02 2011
- Country:
- Location: Heath, Texas
Re: Moose Billet Throtle Tube
Cam L is the one you need if you go this route
Live to Fly
Fly to Live
Fly to Live
-
- Supporting Member I
- Posts: 200
- Joined: 06:26 am Mar 19 2018
- Country: United States
- Location: Slippery Rock. PA
Re: Moose Billet Throtle Tube
Is Cam L a direct fit? I have Pro Taper lock ons and had to trim the cam in order for it to work.
- B737driver
- Gold Member
- Posts: 491
- Joined: 01:11 pm Dec 02 2011
- Country:
- Location: Heath, Texas