93 kdx 200sr exhaust

Discussion specific to KDX models not sold in the USA
Post Reply
jhogg7575
Member
Posts: 19
Joined: 11:53 pm May 10 2018
Country: uk

93 kdx 200sr exhaust

Post by jhogg7575 »

I have a standard exhaust on my kdx and have cutting and welding equipment to remove the inner baffels but I am unsure what jetting changes will be required just for this and maybe the removal of the snorkel. I would like the jets ordered before I go ahead. It's still on 28 mm carb at this point.

Sent from my SM-G935F using Tapatalk
EPalmer
Supporting Member I
Supporting Member I
Posts: 16
Joined: 04:12 am Mar 13 2018
Country: United Kingdom

Re: 93 kdx 200sr exhaust

Post by EPalmer »

I'm interested to see what people say about this
User avatar
Julien D
KDXRider.net
KDXRider.net
Posts: 5858
Joined: 07:53 pm Nov 07 2008
Country: USA
Contact:

Re: 93 kdx 200sr exhaust

Post by Julien D »

With the exhaust opened up and the airbox open you'll likely need to go up a size or two on pilot and main to compensate for the additional airflow. Best to get a few jets so you can run through the process properly. They aren't expensive.
Image
User avatar
jstcraig
Supporting Member I
Supporting Member I
Posts: 144
Joined: 03:01 am Oct 17 2014
Country: Australia
Location: Perth WA AUS T.

Re: 93 kdx 200sr exhaust

Post by jstcraig »

This could be Avery interesting post, please keep us all in the loop as you proceed


Sent from my iPhone using Tapatalk
jhogg7575
Member
Posts: 19
Joined: 11:53 pm May 10 2018
Country: uk

Re: 93 kdx 200sr exhaust

Post by jhogg7575 »

Will look for larger jets. Will post results when I get them

Sent from my SM-G935F using Tapatalk
jhogg7575
Member
Posts: 19
Joined: 11:53 pm May 10 2018
Country: uk

Re: 93 kdx 200sr exhaust

Post by jhogg7575 »

After riding for a few months have got the slow and main jets that I need. Have removed the oil injection system. Now running 32/1 premix. Found a throttle restriction device (large metal spacer stopping carb slide fully working) in the 28 mm carb. So now have cut and welded the exhaust to remove the baffels see pics now onto jetting.ImageImageImageImage

Sent from my SM-G935F using Tapatalk
Hooters
Member
Posts: 18
Joined: 05:41 am Nov 27 2018
Country: Australia

Re: 93 kdx 200sr exhaust

Post by Hooters »

So how was the result? Was it worth the effort?
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 93 kdx 200sr exhaust

Post by KDXGarage »

Did you see any change due to exhaust pipe temperature going up? I would think that the pipe would be hotter now without all the metal from the baffles.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Post Reply