1984 kdx 200 piston rings

Got questions? We got answers....
Post Reply
Asewell
Platinum Member
Platinum Member
Posts: 71
Joined: 11:03 am Jan 03 2012
Country: Canada
Location: British Columbia

1984 kdx 200 piston rings

Post by Asewell »

I'm having trouble finding piston rings for an 1984 kdx 200 as they are now discontinued from kawasaki. Would any of the other years with the same bore and stroke fit, like say a 1988. The cylinder and piston are standard size, plating is still good.
Asewell
Platinum Member
Platinum Member
Posts: 71
Joined: 11:03 am Jan 03 2012
Country: Canada
Location: British Columbia

1984 kdx 200 piston rings

Post by Asewell »

Big thank you to Jeff Fredette for sorting out a set of rings from a later model for me. :grin:
User avatar
Julien D
KDXRider.net
KDXRider.net
Posts: 5858
Joined: 07:53 pm Nov 07 2008
Country: USA
Contact:

1984 kdx 200 piston rings

Post by Julien D »

Very good! You should post the relevant info in the air cooled forum under - reference -, with a good title. It could be handy for someone else!
Image
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14320
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

1984 kdx 200 piston rings

Post by KDXGarage »

What rings did you use? Thanks.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
mtbill
Member
Posts: 23
Joined: 02:43 pm Sep 24 2013
Country:

Re: 1984 kdx 200 piston rings

Post by mtbill »

Asewell, I'm not allowed to send a PM but I'd like to know what rings you used for the '84 200. I know this post is old but I hope you still have the info.

Bill
Asewell
Platinum Member
Platinum Member
Posts: 71
Joined: 11:03 am Jan 03 2012
Country: Canada
Location: British Columbia

Re: 1984 kdx 200 piston rings

Post by Asewell »

Sorry I haven't responded sooner, I didn't go back to check in the relevant section. I will check tonight when I finish work, I believe I have the boxes that the rings came in. The thing is I can't remember which rings he told me to use, but I have the one's I didn't install, if that makes sense.
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14320
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 1984 kdx 200 piston rings

Post by KDXGarage »

Thanks for checking back in.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Asewell
Platinum Member
Platinum Member
Posts: 71
Joined: 11:03 am Jan 03 2012
Country: Canada
Location: British Columbia

Re: 1984 kdx 200 piston rings

Post by Asewell »

Here's the rings that Jeff Fredette sent
Image
Last edited by Asewell on 06:57 pm Jun 15 2014, edited 1 time in total.
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14320
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 1984 kdx 200 piston rings

Post by KDXGarage »

The image does not show and the link does not work.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Asewell
Platinum Member
Platinum Member
Posts: 71
Joined: 11:03 am Jan 03 2012
Country: Canada
Location: British Columbia

Re: 1984 kdx 200 piston rings

Post by Asewell »

Not sure what else to do, I can see the photo when I log on.
Anyway the rings are Kawasaki part # 13008-1116, and Jeff wrote not to use the "top" rings.
Being a bit of a troglodyte I will need to wait until my daughter gets home to help me try and fix the lack of photo.
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14320
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 1984 kdx 200 piston rings

Post by KDXGarage »

Those are the 1989 - 2006 rings. Are there two different rings in the pack??
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
User avatar
Gotanubike
Supporting Member III
Supporting Member III
Posts: 898
Joined: 01:00 pm May 22 2013
Country:
Location: Ontario, Can

1984 kdx 200 piston rings

Post by Gotanubike »

haven't you guys learned anything about the kdx200 in along the years?

"Gain in displacement volume compared to the 175 is through longer stroke; Bore diameter remains the same"
http://en.wikipedia.org/wiki/Kawasaki_KDX200

the bore diameter is the same for all KDX200's...therefor I would assume all stock piston rings are the same?
1990 KDX200
Bike Profile -> http://www.kdxrider.net/forums/viewtopi ... 61#p136315
Suspension Overhaul(Shock+89-92 conventional forks) -> http://www.kdxrider.net/forums/viewtopi ... 15&t=15255
96'-98' RM125 Showa 49mm fork swap -> http://www.kdxrider.net/forums/viewtopi ... 04&t=16994
KDXrider world map! -> https://www.zeemaps.com/map?group=186158
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14320
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 1984 kdx 200 piston rings

Post by KDXGarage »

Dude. Diameter is just one factor of a ring. :oops:
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
User avatar
Gotanubike
Supporting Member III
Supporting Member III
Posts: 898
Joined: 01:00 pm May 22 2013
Country:
Location: Ontario, Can

1984 kdx 200 piston rings

Post by Gotanubike »

I knew I'd end up being corrected on that. Since wiseco's 711M06600 piston application is for 1986-06, thought I remembered it as being all the models.
1990 KDX200
Bike Profile -> http://www.kdxrider.net/forums/viewtopi ... 61#p136315
Suspension Overhaul(Shock+89-92 conventional forks) -> http://www.kdxrider.net/forums/viewtopi ... 15&t=15255
96'-98' RM125 Showa 49mm fork swap -> http://www.kdxrider.net/forums/viewtopi ... 04&t=16994
KDXrider world map! -> https://www.zeemaps.com/map?group=186158
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14320
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 1984 kdx 200 piston rings

Post by KDXGarage »

86 - 06, not 83 - 06, but that has nothing to do with the rings

Kawasaki wants to improve their product. Wiseco hopes for a one size fits all product.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Asewell
Platinum Member
Platinum Member
Posts: 71
Joined: 11:03 am Jan 03 2012
Country: Canada
Location: British Columbia

Re: 1984 kdx 200 piston rings

Post by Asewell »

Yes, 2 rings per pack, Jeff sorted them before he shipped them are wrote which 2 not to use (the top rings) on one of the packs. A little bit more expensive as you need to buy 2 sets, but when you can't get the year specific one anymore it's great to find something that can buy to keep it running. I still haven't sorted the photo/ image thing yet, sorry and your right I logged in from another computer and can't see the photo, my IT assistant (daughter) has been fired.
Asewell
Platinum Member
Platinum Member
Posts: 71
Joined: 11:03 am Jan 03 2012
Country: Canada
Location: British Columbia

Re: 1984 kdx 200 piston rings

Post by Asewell »

Hi Jason, I went back and edited my post with the image of the piston ring boxes, it seems to work now.
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14320
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 1984 kdx 200 piston rings

Post by KDXGarage »

SWEET!! Thanks!!

I get what you are saying on the rings!
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Post Reply