I worked a 03 220 carb for a friend and the R1173L is bent. What will happen (rich or lean) if I install a straight R1174NR instead?
Newbie in neddles, seems my brain do not want to clik on the needle guide post
needle quik question
-
kdxquebec
- Supporting Member II
- Posts: 1255
- Joined: 07:18 am Nov 24 2004
- Country:
- Location: Québec:North Pole
- Contact:
needle quik question
What is the differences between a R1173L (2aflp) (Stock '03 220 needle I think) and a R1174NR
I worked a 03 220 carb for a friend and the R1173L is bent. What will happen (rich or lean) if I install a straight R1174NR instead?
Newbie in neddles, seems my brain do not want to clik on the needle guide post
I worked a 03 220 carb for a friend and the R1173L is bent. What will happen (rich or lean) if I install a straight R1174NR instead?
Newbie in neddles, seems my brain do not want to clik on the needle guide post
'89 KDX 198cc '03 Gasgas Ec250 '13 Husaberg Te300
*CANADA* LEADING THE WORLD IN BEING JUST NORTH OF THE UNITED STATES.
*CANADA* LEADING THE WORLD IN BEING JUST NORTH OF THE UNITED STATES.
-
kdxquebec
- Supporting Member II
- Posts: 1255
- Joined: 07:18 am Nov 24 2004
- Country:
- Location: Québec:North Pole
- Contact:
needle quik question
The operational part of the needle fits into a circular orifice in the carb, so a larger number = a larger diameter needle which is a *leaner* needle.
'89 KDX 198cc '03 Gasgas Ec250 '13 Husaberg Te300
*CANADA* LEADING THE WORLD IN BEING JUST NORTH OF THE UNITED STATES.
*CANADA* LEADING THE WORLD IN BEING JUST NORTH OF THE UNITED STATES.
-
Julien D
- KDXRider.net
- Posts: 5882
- Joined: 07:53 pm Nov 07 2008
- Country: USA
- Contact:
Re: needle quik question
After a quick look at the needle guide, lol...
The 1174N is a bit leaner than the 1173L you're replacing. Should be fine.
The 1174N is a bit leaner than the 1173L you're replacing. Should be fine.
