Page 1 of 1
93 kdx 200sr exhaust
Posted: 12:50 pm Jun 17 2018
by jhogg7575
I have a standard exhaust on my kdx and have cutting and welding equipment to remove the inner baffels but I am unsure what jetting changes will be required just for this and maybe the removal of the snorkel. I would like the jets ordered before I go ahead. It's still on 28 mm carb at this point.
Sent from my SM-G935F using Tapatalk
Re: 93 kdx 200sr exhaust
Posted: 02:03 pm Jun 17 2018
by EPalmer
I'm interested to see what people say about this
Re: 93 kdx 200sr exhaust
Posted: 07:10 am Jun 18 2018
by Julien D
With the exhaust opened up and the airbox open you'll likely need to go up a size or two on pilot and main to compensate for the additional airflow. Best to get a few jets so you can run through the process properly. They aren't expensive.
Re: 93 kdx 200sr exhaust
Posted: 04:11 am Jun 19 2018
by jstcraig
This could be Avery interesting post, please keep us all in the loop as you proceed
Sent from my iPhone using Tapatalk
Re: 93 kdx 200sr exhaust
Posted: 04:38 am Jun 19 2018
by jhogg7575
Will look for larger jets. Will post results when I get them
Sent from my SM-G935F using Tapatalk
Re: 93 kdx 200sr exhaust
Posted: 01:28 pm Oct 13 2018
by jhogg7575
Re: 93 kdx 200sr exhaust
Posted: 06:38 am Dec 03 2018
by Hooters
So how was the result? Was it worth the effort?
Re: 93 kdx 200sr exhaust
Posted: 07:38 am Dec 03 2018
by KDXGarage
Did you see any change due to exhaust pipe temperature going up? I would think that the pipe would be hotter now without all the metal from the baffles.