Thanks for the Help and Resources!

Discussion specific to the 1995 - 2006 KDX200 (H Series) and 1995 - 2005 KDX220R (A Series) models sold in the USA
Post Reply
arkdxrider
Member
Posts: 13
Joined: 05:33 pm Aug 06 2017
Country: United States

Thanks for the Help and Resources!

Post by arkdxrider »

I finally got around to putting my 2000 (or maybe 2001? I forget) KDX 220 back together. After a hare scramble in March one thing lead to another and I realized it had the original piston in it, it had a chip out of it and a cracked skirt. And the cylinder was scratched up... So off it went to Millennium Technologies. Sometimes life gets in the way of riding and I finally got around to putting it back together this weekend. I put it together, gave it fluids, turned the gas on and let the bowl fill... Turned it over twice slowly, then gave it a single good kick with a slight throttle roll and it started on the first kick... I was actually quite surpirsed. I cycled it warm/cold, hot/cold, light ride, then some wide open throttle runs and nothing siezed and on the WOT runs it honestly felt like it was getting more power... I guess the rings were seating in.

Again, thanks for the help and advice on here.. .Finally have it back up and running!
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: Thanks for the Help and Resources!

Post by KDXGarage »

Sweet! Great job on getting it going again!
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
User avatar
VTMTcowboy
Gold Member
Gold Member
Posts: 580
Joined: 07:50 pm May 26 2017
Country: USA

Re: Thanks for the Help and Resources!

Post by VTMTcowboy »

Pictures!
1997 KDX 220
2004 KDX 200
Post Reply