5.4 or a 5.8 Spring for Rear?

Discussion specific to the 1995 - 2006 KDX200 (H Series) and 1995 - 2005 KDX220R (A Series) models sold in the USA
Post Reply
DenverKdxRider
Member
Posts: 42
Joined: 03:11 pm May 04 2020
Country: United States

5.4 or a 5.8 Spring for Rear?

Post by DenverKdxRider »

Hi folks,

Thanks for letting me join! I've got a 96' KDX and looking to get the suspension redone. I'm 235-240 lbs in street clothes. I'm definitely going with a .46 for the fork springs but not sure if I should get a 5.4 or a 5.8 for the back. The RaceTech calculator said I should get a 5.8 to 6 but on a forum here viewtopic.php?t=15156 it was all over the place.

Is a 5.8 overkill? Or should I go with a 5.4? I prefer stiffer suspension for the whoops and rockier riding I normally do here in Colorado..
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 5.4 or a 5.8 Spring for Rear?

Post by KDXGarage »

Welcome. I moved this over to the 1995+ section. The reference section is "supposed to be" more of a posting of facts section, not a Q and A section.

What is your riding weight in full gear with all water backpack, extra gas, tools, parts, etc.? For now, I would suggest a 5.5 or 5.6. Another member has just reported 100 mm sag and 30 mm static sag at 235 pounds in full gear with a 5.4. Years ago, I bought 5.5's from 2006 KX450F's for my 2005 KX250.

Depending on terrain and skill, .46 might not be just enough for you.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
DenverKdxRider
Member
Posts: 42
Joined: 03:11 pm May 04 2020
Country: United States

Re: 5.4 or a 5.8 Spring for Rear?

Post by DenverKdxRider »

Hi KDXGarage,

Just weighed myself. I'm 260 lbs with all my gear on! (Need to loose some weight). I'm gonna use the .46 front fork springs for sure. I could not find anyone selling .48s. Given that I'm 260 with gear would a 5.8 be more suitable?
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 5.4 or a 5.8 Spring for Rear?

Post by KDXGarage »

.48 and 5.6

https://racetech.com/ProductSearch/12/K ... DX200/1996

Race Tech shows they have 48's. Maybe you can find them cheaper somewhere else.

At 260, I would think .48 is the way to go.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
DenverKdxRider
Member
Posts: 42
Joined: 03:11 pm May 04 2020
Country: United States

Re: 5.4 or a 5.8 Spring for Rear?

Post by DenverKdxRider »

Will go with the .48 and the 5.6. Will need to return both my old springs but better to do it right than have some stiffer than a board or unbalanced suspension. Thanks again!
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 5.4 or a 5.8 Spring for Rear?

Post by KDXGarage »

Yeah. It is best to get the rates correct, make sure everything is mechanically, then worry about revalving.

Different bikes and terrain call for different rates. KLX300R used to come with 5.8, but you would have to be around 285 for that on a 95+ KDX. Like the member in the other current thread, I am about a .46/5.4 guy like him, not too far from you.

On the shock, go in a couple clicks or three on rebound.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Post Reply