.. I was on this board about 6 years back with 94 kdx200 ... Sold it after I took it part to rebuild for the money I bought it for.
Now have a 99 kdx200
Just cleaned the KIPs due to a blogging issue ... It was definitely never cleaned
Replacing piston as service history is non existent
Measured the cylinder x and y axis
66.06 mm to 65.89 mm
Piston measures at 65.87
So get wiseco 66mm piston. Right ?
But when the piston to cylinder clearance is . 079 to .089. My clearance is 65.89(piston ). Minus 66.06 ( hi value of cylinder) which is .17
Confused. My first 2 stroke .
I'm back with a piston ?
-
- Supporting Member
- Posts: 46
- Joined: 11:10 am Jul 06 2016
- Country:
- KDXGarage
- KDXRider.net
- Posts: 14090
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: I'm back with a piston ?
Welcome back.
What did you measure it with?
What did you measure it with?
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Supporting Member
- Posts: 46
- Joined: 11:10 am Jul 06 2016
- Country:
Re: I'm back with a piston ?
Digital calipers. Measured the Teledcopong gage.
- KDXGarage
- KDXRider.net
- Posts: 14090
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: I'm back with a piston ?
Do you have the service manual?
My concern with your measuring is that standard is 66.016-66.031. How would yours be smaller? How would a 66 mm piston fit in it??
Where are you measuring cylinder ID? 18 mm from the top?
Where are you measuring piston diameter? 15.5 mm from bottom?
My concern with your measuring is that standard is 66.016-66.031. How would yours be smaller? How would a 66 mm piston fit in it??
Where are you measuring cylinder ID? 18 mm from the top?
Where are you measuring piston diameter? 15.5 mm from bottom?
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128