Hi all . I have recently got hold of a 1990 kdx 200 SR which looks pretty good and apparently been gone over and sorted but I have a few questions .
It starts and runs well but seems to rattle alot on tick over . I have all the receipts for the kips valve so can only assume it's piston noise .
Are the top end rebuild kits the same for these as non SR models?
Also the Kickstarter slips every now and again and I have looked into this on internet where it could be the gear having worn teeth .
Can you get these and the spring or is there a repair .
Regards Neil
Kids 200 SR 1990
-
KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Kids 200 SR 1990
Look on this site or Youtube for KIPS rattle. Watch some videos to see if yours sounds the same.
At 32 years old, the teeth may be worn. There is a guy on here from Canada that got his gear teeth improved to make it work better. It's in a thread a couple of months ago. His user name is Slick Rick.
At 32 years old, the teeth may be worn. There is a guy on here from Canada that got his gear teeth improved to make it work better. It's in a thread a couple of months ago. His user name is Slick Rick.
Thank you for participating on kdxrider.net. 
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128