1/2 kick start issue - Parts Required?
- Goat
- Supporting Member III
- Posts: 720
- Joined: 03:22 pm Oct 22 2019
- Country: USA
- Location: Clinton, WA
Re: 1/2 kick start issue - Parts Required?
I am guessing the crack in cover probably means the surfaces will not mate as cleanly as needed.
Goat
95 KDX200
22 KX250
95 KDX200
22 KX250
- SS109
- KDXRider.net
- Posts: 5784
- Joined: 05:11 am Aug 23 2009
- Country: USA
- Location: Tucson, AZ, USA
- Contact:
Re: 1/2 kick start issue - Parts Required?
That's a bummer. Those side covers are getting a lot tougher to find. Not sure what that white stuff is. Personally, I would probably take the cover to a good aluminum welder and have that crack welded then very carefully sand that mating surface down to get it perfect.
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
- Goat
- Supporting Member III
- Posts: 720
- Joined: 03:22 pm Oct 22 2019
- Country: USA
- Location: Clinton, WA
Re: 1/2 kick start issue - Parts Required?
I am considering that too. But sometimes (no matter how good) welding creates as much prob as it solves.
I will re-evaluate if I end up tearing it apart again.
Right now fingers crossed that it stays a small drip I can live with.
I am literally tired of riding MX bike in the tight woods. And hope the KDX will be ok, as is for a while.
I will re-evaluate if I end up tearing it apart again.
Right now fingers crossed that it stays a small drip I can live with.
I am literally tired of riding MX bike in the tight woods. And hope the KDX will be ok, as is for a while.
Goat
95 KDX200
22 KX250
95 KDX200
22 KX250
- Goat
- Supporting Member III
- Posts: 720
- Joined: 03:22 pm Oct 22 2019
- Country: USA
- Location: Clinton, WA
Re: 1/2 kick start issue - Parts Required?
Let the good times roll!
- Attachments
-
- F4778B71-C2FD-49BB-A61D-3BCEAE3A15D1.jpeg (470.54 KiB) Viewed 1060 times
Goat
95 KDX200
22 KX250
95 KDX200
22 KX250
- KDXGarage
- KDXRider.net
- Posts: 14060
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1/2 kick start issue - Parts Required?
What a nice looking scooter you have there, sir!
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128