No wonder I had the chain too tight when sitting on it. This is measured at 65mm when on the side stand per the manual. When the rear swingarm is off the ground, like in this pic, this is how much more slack is in the chain.
Chain sag
-
Vossman
- Supporting Member II
- Posts: 262
- Joined: 06:23 pm Jul 24 2017
- Country: USA
Chain sag
No wonder I had the chain too tight when sitting on it. This is measured at 65mm when on the side stand per the manual. When the rear swingarm is off the ground, like in this pic, this is how much more slack is in the chain.
-
ericr
- Gold Member
- Posts: 246
- Joined: 06:57 pm Nov 06 2017
- Country: USA
- Location: Gig Harbor, WA
Re: Chain sag
That looks a bit loose. When on a stand, I put it in gear and turn the wheel forward to tighten the lower run of the chain. Then, at the back edge of the top slider, I measure 3 fingers width, or roughly 2.5 inches.
'02 KDX 200, '02 KDX 220 - My restoration thread
-
KDXGarage
- KDXRider.net
- Posts: 14059
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Chain sag
Yeah. That looks a bit loose!
Thank you for participating on kdxrider.net. 
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128