Been lurking for a while. Thanks everyone who posts here.
Picked up an old barn find. Was in pretty poor condition. Radiator and engine oil had become one with each other, much the same story with the swing arm and frame.
Figured I would use it to learn about bikes so ended up pulling it apart and poking around. Bit off more than I could chew for a noobie, but pottered forward slowly and thanks to resources like this forum, the bike actually works now.
Currently got some road bike bits and bobs on it because my main track bike blew up and I figured why not see how well a kdx does as a motard. (Mixed feelings about using it on tarmac)
I might make a write up later about the various experiment results, such as klx250 rear shocks, clip on bars(Interesting outcome ) and the various on going antivibration and chatter experiments which I am havinh trouble with
1989 kdx200sr noobie rebuild
-
- Member
- Posts: 36
- Joined: 09:59 am Jun 30 2020
- Country: Australia
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1989 kdx200sr noobie rebuild
Welcome to kdxrider.net. She looks a lot different in the 2nd pic than the first!
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 36
- Joined: 09:59 am Jun 30 2020
- Country: Australia
Re: 1989 kdx200sr noobie rebuild
Hahaha. I have probably as much time putting a shine to it than riding it so far. I must be married now. Is this what it feels like
-
- Member
- Posts: 48
- Joined: 10:23 pm Oct 31 2020
- Country: United States
- Location: NJ
Re: 1989 kdx200sr noobie rebuild
That hydraulic clutch is cool.
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1989 kdx200sr noobie rebuild
What is the blue thing? crankcase vent filter?
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 36
- Joined: 09:59 am Jun 30 2020
- Country: Australia
Re: 1989 kdx200sr noobie rebuild
Yeah I was not expecting much when I ordered it but it seems that china pitbike products are not that bad. Lets see how long it lasts.
Its another ebay fuel filter that is being used as an oil filter/viewing port. It screws open to make bleeding line easier. Hooked up to a universal radiator overflow that is hiding in the airbox and filled with 2t oil. The original oil tank was missing. I clean airbox after rides so figured just top up oil then.
I dont do proper enduros with it. I would not trust this set up for proper enduros as the line could get bashed against a rock but for light pottering around like I do, it hasn't had any problems. Yet.
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1989 kdx200sr noobie rebuild
If it works, it works. Nice garage floor. :-)
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 36
- Joined: 09:59 am Jun 30 2020
- Country: Australia