Hello from South Ga.. Richard, KDX 450
-
- Member
- Posts: 4
- Joined: 01:11 pm Aug 29 2019
- Country: United States
Hello from South Ga.. Richard, KDX 450
Hello Folks, Richard Here.. I'm Looking for a Flywheel for My 82 KDX 450, and any One Flywheel from a 79 - 82 Model 250, 400, 420, or 450 Will work According to My Partzilla Rep... Hope You All are Doin Good, and Please HELP Lol
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Hello from South Ga.. Richard, KDX 450
Welcome to kdxrider.net. Good luck on the search.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 4
- Joined: 01:11 pm Aug 29 2019
- Country: United States
Re: Hello from South Ga.. Richard, KDX 450
Thank You @KDXGarage.. I appreciate the Welcome
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Hello from South Ga.. Richard, KDX 450
https://www.partzilla.com/catalog/kawas ... -kdx450-a1
https://www.partzilla.com/catalog/kawas ... /generator
Click on the part number.
https://www.partzilla.com/product/kawas ... ba2618fcb3
This Kawasaki 21007-1012 FLYWHEEL,MAGNETO Not Available fits the following models and components:
Kawasaki Motorcycle 1982 KDX450 - KDX450-A1 Generator
Kawasaki Motorcycle 1981 KDX420 - KDX420-B1 IGNITION/GENERATOR
Kawasaki Motorcycle 1980 KDX250 - KDX250-A1 IGNITION/GENERATOR
Kawasaki Motorcycle 1980 KDX400 - KDX400-A2 IGNITION/GENERATOR
Kawasaki Motorcycle 1979 KDX400 - KDX400-A1 IGNITION/GENERATOR
https://www.partzilla.com/catalog/kawas ... /generator
Click on the part number.
https://www.partzilla.com/product/kawas ... ba2618fcb3
This Kawasaki 21007-1012 FLYWHEEL,MAGNETO Not Available fits the following models and components:
Kawasaki Motorcycle 1982 KDX450 - KDX450-A1 Generator
Kawasaki Motorcycle 1981 KDX420 - KDX420-B1 IGNITION/GENERATOR
Kawasaki Motorcycle 1980 KDX250 - KDX250-A1 IGNITION/GENERATOR
Kawasaki Motorcycle 1980 KDX400 - KDX400-A2 IGNITION/GENERATOR
Kawasaki Motorcycle 1979 KDX400 - KDX400-A1 IGNITION/GENERATOR
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Supporting Member
- Posts: 739
- Joined: 08:28 am Apr 21 2019
- Country: United States
- Location: North Cackalack
Re: Hello from South Ga.. Richard, KDX 450
I just looked at a sold one on eBay and compared to my 85 KDX200 flywheel. They look really similar, both having three magnets. The different is the jetway is rotated about 30 degree. It’s aligned with the middle of the magnet as opposed to the 21007-1012 flywheel where the keyway aligns between two of the magnets. There’s also multiple poles in each magnet. I recorded my pole pattern in a piece of paper.
Where I’m going with this is maybe the stator plate can be rotated to be used on that bike. You’d have to get the timing just right though. And I don’t know about dimensions, that flywheel could be bigger or smaller.
Where I’m going with this is maybe the stator plate can be rotated to be used on that bike. You’d have to get the timing just right though. And I don’t know about dimensions, that flywheel could be bigger or smaller.
I like turtles