Daz from Down Under. 91KDX250 large bore.

Welcome to KDXRider.net! Please take a moment to introduce yourself, and meet the group.
Post Reply
Daz
Member
Posts: 3
Joined: 09:00 am Nov 28 2018
Country: Australia

Daz from Down Under. 91KDX250 large bore.

Post by Daz »

:cool: Thanks for adding me. I am 3/4 through spruce up. I have a 91 250 on largest bore (306 I'm told) Fresh bottom, Wiseco piston and rings, hot rod, and bearings. Rear guard upgrade, new lighting loom and controls, trailtech speedo and dash set, plenty more to come. I have a parts bike so I have two sets of wheels, will fit kendas to one set running 14/47 sprockets, and battlecross on the other pair running 13/48 for the tight singles and track days. I intend to register her for the road here in Melbourne, Australia. Cheers.
Engine No's. Build-JKADXME10MA000421
Parts-JKADXME16MA000861
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: Daz from Down Under. 91KDX250 large bore.

Post by KDXGarage »

Welcome to kdxrider.net. Good luck on the continued work!
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Daz
Member
Posts: 3
Joined: 09:00 am Nov 28 2018
Country: Australia

Re: Daz from Down Under. 91KDX250 large bore.

Post by Daz »

Cheers, its a gold mine here. Hope to upload some pics soon and ask a few intelligent questions.
User avatar
bufftester
Platinum Member
Platinum Member
Posts: 3455
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA

Re: Daz from Down Under. 91KDX250 large bore.

Post by bufftester »

Welcome to the forums! Lots of Aussies active on here.
Daz
Member
Posts: 3
Joined: 09:00 am Nov 28 2018
Country: Australia

Re: Daz from Down Under. 91KDX250 large bore.

Post by Daz »

Cheers.
Dan 250sr
Supporting Member III
Supporting Member III
Posts: 93
Joined: 03:01 am Nov 06 2018
Country: Japanese version
Location: UK Hertford

Re: Daz from Down Under. 91KDX250 large bore.

Post by Dan 250sr »

Hello Daz , you wouldn't have a part number for piston they used? Would you know if yours is 70mm stroke to..
I've just had mine 265 cc , only because that was biggest piston I could find. Cheers ..
Post Reply