Thanks for adding me. I am 3/4 through spruce up. I have a 91 250 on largest bore (306 I'm told) Fresh bottom, Wiseco piston and rings, hot rod, and bearings. Rear guard upgrade, new lighting loom and controls, trailtech speedo and dash set, plenty more to come. I have a parts bike so I have two sets of wheels, will fit kendas to one set running 14/47 sprockets, and battlecross on the other pair running 13/48 for the tight singles and track days. I intend to register her for the road here in Melbourne, Australia. Cheers.
Engine No's. Build-JKADXME10MA000421
Parts-JKADXME16MA000861
Daz from Down Under. 91KDX250 large bore.
-
- Member
- Posts: 3
- Joined: 09:00 am Nov 28 2018
- Country: Australia
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Daz from Down Under. 91KDX250 large bore.
Welcome to kdxrider.net. Good luck on the continued work!
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 3
- Joined: 09:00 am Nov 28 2018
- Country: Australia
Re: Daz from Down Under. 91KDX250 large bore.
Cheers, its a gold mine here. Hope to upload some pics soon and ask a few intelligent questions.
- bufftester
- Platinum Member
- Posts: 3461
- Joined: 06:03 pm Oct 31 2012
- Country: USA
- Location: University Place, WA
Re: Daz from Down Under. 91KDX250 large bore.
Welcome to the forums! Lots of Aussies active on here.
-
- Member
- Posts: 3
- Joined: 09:00 am Nov 28 2018
- Country: Australia
-
- Supporting Member III
- Posts: 93
- Joined: 03:01 am Nov 06 2018
- Country: Japanese version
- Location: UK Hertford
Re: Daz from Down Under. 91KDX250 large bore.
Hello Daz , you wouldn't have a part number for piston they used? Would you know if yours is 70mm stroke to..
I've just had mine 265 cc , only because that was biggest piston I could find. Cheers ..
I've just had mine 265 cc , only because that was biggest piston I could find. Cheers ..