Rear break reservoir after mark Mod
-
LLSB
- Member
- Posts: 2
- Joined: 01:19 pm Dec 16 2023
- Country: USA
Rear break reservoir after mark Mod
I have an old 1992 KDX250 with a broken rear brake reservoir to be replaced, OEM for ~ $30.00. So, this is an excellent replacement for the price but it will need a simple modification for this to work, at least on my bike. I need to move (bend) the reservoir hose nozzle by bending it from the present position to a straight-down position. A "controlled heat source set to ~440 F using a drill bit.
- Attachments
-
- After Market Reservoir
- IMG_4324.jpg (115.52 KiB) Viewed 6615 times
-
- After bending
- IMG_4319.jpg (91.44 KiB) Viewed 6615 times
-
- Installed
- Brake Master Tank.gif (12.34 KiB) Viewed 6615 times
-
LLSB
- Member
- Posts: 2
- Joined: 01:19 pm Dec 16 2023
- Country: USA
Re: Rear break reservoir after Mod
I have an old 1992 KDX250 with a broken rear brake reservoir to be replaced, OEM for ~ $30.00. So, this is an excellent replacement for the price but it will need a simple modification for this to work, at least on my bike. I need to move (bend) the reservoir hose nozzle by bending it from the present position to a straight-down position. A "controlled heat source set to ~440 F using a drill bit.
-
KDXGarage
- KDXRider.net
- Posts: 14297
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Rear break reservoir after mark Mod
That's pretty neat. Keep that KDX going.
Thank you for participating on kdxrider.net. 
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128