Rieju MR Racing 300 - REVIEW
Posted: 02:30 pm Jul 09 2022
2022 Rieju MR Racing 300 REVIEW…
Our local shop is Gearhead Junction http://www.GearheadJunction.com here in Pearisburg, Virginia. Terry Rafferty is the owner and is a good friend of ours. His shop is the third largest by volume Royal Enfield dealer in the US and he also has the Rieju brand. There are only 39 dealers here in the US, his is the only one in Virginia.The 2021 and 22 Riejus are basically 2018 GasGas bikes that are rebadged and slightly improved under the famous spanish Rieju name. They bought the rights to this architecture when KTM bought the old GasGas name and started building rebadged red KTMS. Rieju has a long enduro tradition in Spain and are well known internationally, but they are still a rare sight here in the US. What’s nice is we can order 2018 GasGas parts and they will fit this bike.
Terry has been giving Henry and I some racing support this year so when we realized it was time for an upgrade we knew we needed to take a serious look at this bike. Pricing on these bikes run significantly below what the big brands are and that is obviously a big consideration. Gearhead received a batch of bikes just a few weeks ago and so I went by to take a look. Somehow I ended up bringing a fresh 300 Racing home to check out. After carefully breaking it in per the manual we had fallen in love. In the ten hours since, we have had Travis at GoRace Suspension set up the very nice KYB suspension and also rejetted. This bike RIPS! Henry is riding everything a gear higher and is very excited to race it later this month.
My time on this bike is still somewhat limited and I’m definitely more comfortable on my KDX 200, but I’ve ridden it a fair amount as well as his xc-w and have some general impressions along with what he has expressed.The bike feels very nimble in the woods, but has beaucoup power to spare. The grunt on this machine is undeniable. It modulates the horses with a Magura hydraulic clutch that feels smooth and consistent. The newly redesigned starter addresses a weak link (now oil-cooled) found on the older bikes. As a KDX guy I’m not really jealous and still use the kicker mounted in the right place instead of the EZ Button. However Henry thinks that button is the coolest thing ever. To me the kicker that most of the other bikes in this class out there are now missing is a deal breaker.
The bike is really nicely set up for ISDE with an easy to a remove front wheel axel pull, a quick pull air filter cover and filter release, quick release seat which hides the battery, and there’s easy access to the dependable Keihin PWKS carb for jetting adjustments. The hour meter/speedometer activates (lights up) automatically when the bike is rolled or started, there are no keys or power switches to fool with. The tail light goes to high mode when the brakes are engaged and there is a pod on the handlebar for easily adding signals for street use if desired. We’ll probably swap that pod out for a simple starter button just to ensure that we don’t damage that multi-function switch, though it looks pretty sturdy. There is also a map switch to change the engine’s power delivery between wet and dry conditions. I’ve not played with that yet, but Henry says the difference in how the power hits is very noticeable.
Everything on the bike is tucked in tight out of the way of brush and rocks. There are nice wide pegs, and the bike is equipped with strong and dependable Nissin brakes like on my KDX. There is a see through 2.6 gallon tank which is really appreciated and a reserve function on the petcock which is easy to reach, but placed up tight against the tank bottom where it won’t be snagged in the woods.
The bike comes with DOT Michelin Enduro medium tires, the rear is a huge 140/80-18. They’ve been surprisingly good as we break it in. We are going to swap them out next week for the Bridgestone M59 up front and Dunlop MX33 120/80 on the rear on 12psi mousses. Henry has a ‘hit everything hard’ riding style that has rewarded him with three flats this year. Time to give the foam hoops a try. This setup is recommended by our local pro. I’m interested to see how it feels. Being that we ride in a very hard enduro locale Henry has already bolted on Enduro Engineering radiator braces and is about to bolt on a SXS skid plate with linkage guard. Some Moose Racing brush busters are now protecting his levers and hands.
It’s not green, but until Kawasaki starts building a modern 2 stroke enduro bike I don’t see Henry going for it. Though this bike could pass for a modern KDX with the color properly adjusted.
My son has been griping about not having enough power this year racing B on his 2008 KTM 200 xc-w. His time spent in the gym preparing for his senior year playing linebacker has packed on some weight in the form of muscle (5’9” 175 lbs) and he’s pretty strong. The 200 has been very good, even dominating in the woods, but when they hit the WOT GP sections of the course he’s getting his doors blown. All indications were that the bike was tuned properly and healthy, but the 4 strokes were just stronger in those sections. It really sucks putting time on those boys in the single track only to be chased down in the fields. With our goal of pursuing Nat’l Enduro points next year and the VCHSS hare scramble series we felt it was time to start looking around.Our local shop is Gearhead Junction http://www.GearheadJunction.com here in Pearisburg, Virginia. Terry Rafferty is the owner and is a good friend of ours. His shop is the third largest by volume Royal Enfield dealer in the US and he also has the Rieju brand. There are only 39 dealers here in the US, his is the only one in Virginia.The 2021 and 22 Riejus are basically 2018 GasGas bikes that are rebadged and slightly improved under the famous spanish Rieju name. They bought the rights to this architecture when KTM bought the old GasGas name and started building rebadged red KTMS. Rieju has a long enduro tradition in Spain and are well known internationally, but they are still a rare sight here in the US. What’s nice is we can order 2018 GasGas parts and they will fit this bike.
Terry has been giving Henry and I some racing support this year so when we realized it was time for an upgrade we knew we needed to take a serious look at this bike. Pricing on these bikes run significantly below what the big brands are and that is obviously a big consideration. Gearhead received a batch of bikes just a few weeks ago and so I went by to take a look. Somehow I ended up bringing a fresh 300 Racing home to check out. After carefully breaking it in per the manual we had fallen in love. In the ten hours since, we have had Travis at GoRace Suspension set up the very nice KYB suspension and also rejetted. This bike RIPS! Henry is riding everything a gear higher and is very excited to race it later this month.
My time on this bike is still somewhat limited and I’m definitely more comfortable on my KDX 200, but I’ve ridden it a fair amount as well as his xc-w and have some general impressions along with what he has expressed.The bike feels very nimble in the woods, but has beaucoup power to spare. The grunt on this machine is undeniable. It modulates the horses with a Magura hydraulic clutch that feels smooth and consistent. The newly redesigned starter addresses a weak link (now oil-cooled) found on the older bikes. As a KDX guy I’m not really jealous and still use the kicker mounted in the right place instead of the EZ Button. However Henry thinks that button is the coolest thing ever. To me the kicker that most of the other bikes in this class out there are now missing is a deal breaker.
The bike is really nicely set up for ISDE with an easy to a remove front wheel axel pull, a quick pull air filter cover and filter release, quick release seat which hides the battery, and there’s easy access to the dependable Keihin PWKS carb for jetting adjustments. The hour meter/speedometer activates (lights up) automatically when the bike is rolled or started, there are no keys or power switches to fool with. The tail light goes to high mode when the brakes are engaged and there is a pod on the handlebar for easily adding signals for street use if desired. We’ll probably swap that pod out for a simple starter button just to ensure that we don’t damage that multi-function switch, though it looks pretty sturdy. There is also a map switch to change the engine’s power delivery between wet and dry conditions. I’ve not played with that yet, but Henry says the difference in how the power hits is very noticeable.
Everything on the bike is tucked in tight out of the way of brush and rocks. There are nice wide pegs, and the bike is equipped with strong and dependable Nissin brakes like on my KDX. There is a see through 2.6 gallon tank which is really appreciated and a reserve function on the petcock which is easy to reach, but placed up tight against the tank bottom where it won’t be snagged in the woods.
The bike comes with DOT Michelin Enduro medium tires, the rear is a huge 140/80-18. They’ve been surprisingly good as we break it in. We are going to swap them out next week for the Bridgestone M59 up front and Dunlop MX33 120/80 on the rear on 12psi mousses. Henry has a ‘hit everything hard’ riding style that has rewarded him with three flats this year. Time to give the foam hoops a try. This setup is recommended by our local pro. I’m interested to see how it feels. Being that we ride in a very hard enduro locale Henry has already bolted on Enduro Engineering radiator braces and is about to bolt on a SXS skid plate with linkage guard. Some Moose Racing brush busters are now protecting his levers and hands.
It’s not green, but until Kawasaki starts building a modern 2 stroke enduro bike I don’t see Henry going for it. Though this bike could pass for a modern KDX with the color properly adjusted.