Hey guys i have a slight problem here. When i REV but mostly when ridden my CR just squirts all the coolant out the overflow.WHY?
Ive been told it could be the water pump but im not sure why it would do that then anyway. Ive already blown a head gasket when the bike over heated, but thats been sorted now.
Any suggestions? Shot
1999 Honda CR125 cant hold coolant?
-
- Member
- Posts: 24
- Joined: 12:33 pm Dec 17 2012
- Country:
- Location: South Africa
1999 Honda CR125 cant hold coolant?
Go buy a 2stroke!
-
- Member
- Posts: 33
- Joined: 08:23 am Dec 17 2012
- Country:
Re: 1999 Honda CR125 cant hold coolant?
Sounds as if the system could be pressurising... you sure the head gasket issue's been properly sorted? Could be air entering the system elsewhere... was the head checked for trueness after the HG was replaced/is everything torqued down properly and are the hoses in good order?
Flyin' the Flag for Team Vintage
- rbates9
- Supporting Member II
- Posts: 3164
- Joined: 06:07 pm Apr 27 2010
- Country:
- Location: UPSTATE New York
1999 Honda CR125 cant hold coolant?
It does sound like a head gasket issue, or could be a crack in the head or cylinder.
- Julien D
- KDXRider.net
- Posts: 5858
- Joined: 07:53 pm Nov 07 2008
- Country: USA
- Contact:
Re: 1999 Honda CR125 cant hold coolant?
Agree with Rbates.
-
- Member
- Posts: 24
- Joined: 12:33 pm Dec 17 2012
- Country:
- Location: South Africa
1999 Honda CR125 cant hold coolant?
Yeah it was torqued properly. But i do need to rebuild the top end. Piston and barrel are scored. Head was a bit mashed but wasnt to bad. Skimmed it. Ill do a all round check with the hoses.
Go buy a 2stroke!
- TheJackRabbit
- Supporting Member
- Posts: 147
- Joined: 11:05 pm Sep 29 2012
- Country:
- Location: Western PA
Re: 1999 Honda CR125 cant hold coolant?
you may also want to check the radiator cap for dirt or cracks and the rubber seal below it
http://www.youtube.com/allthatstuff35 <--- some KDX videos here
I'm smarter than I act
I'm smarter than I act
- gsa102
- Supporting Member II
- Posts: 453
- Joined: 12:33 pm Aug 16 2011
- Country:
- Location: PA
Re: 1999 Honda CR125 cant hold coolant?
CR 125s will stretch the threads for the head studs. Use a drill press (to keep them square) to drill out and helicoil. Very common.
This is my rifle, this is my gun, the YZ to go fast, the KDX is for fun!
96 KDX 200, 09 YZ 250
96 KDX 200, 09 YZ 250