KDXRIDER.NET

Hey. I’m new on here. I need some help. I have a 1984 kdx 250 air cooled. I want to restore it to at least riding condition but I have no clue where to find parts. Does anyone have an idea of where I can find parts for this particular bike?

I need a magneta and plastic and carburetor and cables

Best person to contact is Jeff Fredette of Fredette Racing Products.

Cool bike. The problem with it is - parts!

You can find reproduction plastics at https://www.dcvmx.com/1983-1985-kawasak ... c-kit.html
They aren't as shiny or smooth as the factory plastic, but they are better than no plastic.

https://hotfootmoto.net/store/home.php?cat=249 Hotfoot makes intakes and some parts like chain sliders.

Good luck finding the tank - it'll have to be used. And be careful that the old used tanks haven't sat dry for years and cracked. Probably ebay - same for the carb - I don't know. Clarke makes a universal KDX tank that might fit.

As for cables - I don't know - I usually just get those off ebay, too.

Magneto - if you mean the stator and flywheel magnets - that's a common problem. The magnets fall off the flywheel and destroy the stator. And all components of that system are NLA. I don't know of a place for a KDX250 stator. Maybe a KXT Tecate? There are some repo KDX/Tecate magnets on ebay for quite a bit of money if you need new magnets. And there are a few places for repo KDX200 stators. Pricey in the hundreds of dollars. Maybe call some of these companies? This mechanical problem will be your hardest obstacle to overcome probably.

Something to consider - keep an eye out for another bike. Another one might appear within driving distance to you and it might have the parts you need. Yeah, it might not get the bike going immediately but the search will give you something to do during winter months.

Good luck! I always wanted to ride the 250. I've have or had 86, 87, 88, and 96 KDX 200's. Fantastic bikes, but I always wondered what the 250 was like.

Try HPI Ignitions or Vape/Power Dynamo. I believe one or both may have a complete ignition system and flywheel for that bike.

Congratulations on the KDX! Welcome to kdxrider.net. Buying an "Owner's Manual & Service Manual" will be the best money you ever spend on it.

Look on eBay for used parts.

Hi I'm currently restoring an 84 250 I'm in the uk and the bike came from the USA.I have managed to find quite a few parts but it's not a cheap .my bike was complete but needed a total rebuild the only thing missing was the digital odometer which I managed to find a NOS item.i have replaced all the plastics with pattern as the originals were brittle and bleached.wheel's/engine are all rebuilt just searching for small parts original nuts bolts ect seems to be the biggest challenge at the present time