For KDX175 IMS Recommends

Discussion specific to the various air-cooled KDX models sold in the USA
Post Reply
Swamp Lifer
Member
Posts: 3
Joined: 01:12 pm Nov 07 2021
Country: United States

For KDX175 IMS Recommends

Post by Swamp Lifer »

Contacted IMS to get the fit for KDX175 foot pegs and this is what I got back:


From what I see is the 1981 KDX175 foot peg uses a 8mm diameter pivot pin. Parts schematic I looked at on http://bikebandit.com show the return spring sits around a small barrel on the bsck/bottom side of the mount on your OEM foot peg. This looks just like IMS Products part # 273116, Super Stock, 93116-4 IMS Pro Series, 343116-M Core MX and 343116-E Core Enduro foot pegs. Code 3116 is one of the applications IMS Products supplies return springs.

All IMS Products foot pegs are cast 17-4 Stainless steel Super Stock least aggressive with Pro Series Most aggressive. Core MX and Core Enduro have excellent grip Core Enduro may be a little longer than you want see dimensions on IMS Products web site http://www.imsproducts.com.

I ordered the core enduro and will report back when I get them in my grubby hands.
Swamp Lifer

Livin in the Swamps of Georgia

Currently own the following:
1972 Honda QA50
1974 Suzuki RL250
1978 Honda CR125M
1981 Kawasaki KDX175
1985 Harley Davidson FXST
1986 Honda TLR200
1992 Harley Davidson FLHS
2002 Sherco 2.9T
2003 Royal Enfield 500
2017 Rokon Trailbreaker w/ Sidecar
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: For KDX175 IMS Recommends

Post by KDXGarage »

Thanks for passing on the info. They look awesome on the website.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Post Reply