1984 kdx200

Discussion specific to the various air-cooled KDX models sold in the USA
Post Reply
Buljr21
Member
Posts: 7
Joined: 10:05 pm Jun 10 2021
Country: USA

1984 kdx200

Post by Buljr21 »

Does anyone know if I can put a 1988 kdx200 expansion chamber on my 1984 kdx 200 ?
User avatar
bufftester
Platinum Member
Platinum Member
Posts: 3455
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA

Re: 1984 kdx200

Post by bufftester »

They have the same diameter at the exhaust port, but IIRC the pipe is shaped differently because on the 88 they changed the cylinder to accommodate the KIPS. You could probably cut and weld it if you are competent or know someone who is with a welder, but it likely won't be easy. You'd probably also need to relocate the mount brackets.
Buljr21
Member
Posts: 7
Joined: 10:05 pm Jun 10 2021
Country: USA

Re: 1984 kdx200

Post by Buljr21 »

Dang I mean I have a welder myself but I’m not the best at it and don’t want to risk messing anything up thanks for the response I’m probably just gonna save a little money and get the dg expansion chamber
Buljr21
Member
Posts: 7
Joined: 10:05 pm Jun 10 2021
Country: USA

Re: 1984 kdx200

Post by Buljr21 »

Do you know any other expansion chambers that might fit my 84 kdx200 ?
Post Reply