1985 KDX200 magneto and cylinder
-
- Member
- Posts: 45
- Joined: 11:18 pm Apr 28 2021
- Country: United States
1985 KDX200 magneto and cylinder
Hi all, I have a 1985KDX200. Recently the crank seals went out on it, so I thought I might not need to split the case. So one crank seal is on the magneto side, so I pulled the magneto off and a magnet was broken in half. That was narly I had never seen that before, it was obviously my fault but I was surprised to see exposed magnets with nothing around it. Now I have been looking around for a 85' magneto, but cant find one. But I have bee able to find some 90's KDX200 magnetos. Would that work? if so could I use the same stator? Also the top end is crispy, there is scarring AND pitting. So I was looking for places to do it and no one would do it because of the nikasil coding, I guess California doesn't allow or something. So any suggestions and answer's would be great. Thanks
- KDXGarage
- KDXRider.net
- Posts: 14085
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1985 KDX200 magneto and cylinder
Welcome to kdxrider.net.
https://www.ebay.com/itm/233586627633?h ... Sw2FVbPM38
PowerSeal USA or Millenium Technologies to replate the cylinder. Wossner piston and rings have been suggested by some as a safe OEM replacement.
https://www.ebay.com/itm/233586627633?h ... Sw2FVbPM38
PowerSeal USA or Millenium Technologies to replate the cylinder. Wossner piston and rings have been suggested by some as a safe OEM replacement.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 45
- Joined: 11:18 pm Apr 28 2021
- Country: United States
Re: 1985 KDX200 magneto and cylinder
Ok thankyou. I saw that you provided a website for the magnets, but could I just buy a 90's magneto ?
- KDXGarage
- KDXRider.net
- Posts: 14085
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1985 KDX200 magneto and cylinder
I am not sure. You might want to call Jeff Fredette and ask him if he sells a solution. frpoffroad.com
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 45
- Joined: 11:18 pm Apr 28 2021
- Country: United States
Re: 1985 KDX200 magneto and cylinder
Great thanks, ill give him a call tomorrow
- KDXGarage
- KDXRider.net
- Posts: 14085
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1985 KDX200 magneto and cylinder
I know that with a modified stator plate, one can run a 1995 + KDX stator on a 1986 - 1988, but I don't know about the 1985 and earlier. That's before my time for big bikes. I was on a 1985 KDX80 at the time. :-)
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 45
- Joined: 11:18 pm Apr 28 2021
- Country: United States
Re: 1985 KDX200 magneto and cylinder
Yea I think the only difference from the 85 to the 86 was the powervalve, engine wise. When you say modified are you talking trimming the stator or also buying a 90's stator?
- KDXGarage
- KDXRider.net
- Posts: 14085
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1985 KDX200 magneto and cylinder
There are several more differences between the 183 - 1985 engines and 1986 - 1988 engines. Search on here for a few threads where other people have done it, then shown pictures and their story on how it went.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128