Hey guys I'm on the hunt for a rod kit for my 84 kdx200
I know pro-x makes one that will work I believe its for a kx125 but unsure of the year
but I'm having a hard time finding any kind of cross reference
Any Help would be appreciated
Thanks Mikey
1984 kdx200 Rod Kit
-
- Platinum Member
- Posts: 80
- Joined: 11:50 pm Jan 26 2021
- Country: US
- Location: Los Angeles, CA
Re: 1984 kdx200 Rod Kit
Vintco is a good source for vintage parts - they come close to matching your kdx200 but not quite. Still, it might be worth a call as they list out dimensions for their rods and might be able to make a match.
I see one listed on ebay - no idea on the quality or vendor - good luck!
I see one listed on ebay - no idea on the quality or vendor - good luck!
- KDXGarage
- KDXRider.net
- Posts: 14118
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1984 kdx200 Rod Kit
If it was me, I'd call Hot Rods and see if their 8102 gets recommended as a replacement.
On partzilla.com, the 1981 KX125 has matching part numbers for the following:
washers
crank pin
big end bearing
small end bearing
The rod is not shown individually.
Vintco shows their kit as fitting the 1980 - 1981 KDX175.
https://www.ebay.com/itm/Hot-Rods-Forge ... SwL91gJh7d
From what I have read, that is Casey Lytle's brother and parents' shop. He was a pro racer in MX for a while.
On partzilla.com, the 1981 KX125 has matching part numbers for the following:
washers
crank pin
big end bearing
small end bearing
The rod is not shown individually.
Vintco shows their kit as fitting the 1980 - 1981 KDX175.
https://www.ebay.com/itm/Hot-Rods-Forge ... SwL91gJh7d
From what I have read, that is Casey Lytle's brother and parents' shop. He was a pro racer in MX for a while.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128