IMS Footpegs

Discussion specific to the 1989 - 1994 (E Series) KDX200 model sold in the USA
Post Reply
bigdhusker
Member
Posts: 13
Joined: 05:17 am Mar 01 2018
Country: United States

IMS Footpegs

Post by bigdhusker » 02:54 pm Jan 29 2020

I am in the middle of a frame off build on a 1992 KDX. I bought the IMS Super Sport footpegs, they fit the frame mounts perfect but the stock footpeg springs are too wide to fit into the new pegs. Has anyone utilized these pegs, and what springs did you use?

Guffer
Supporting Member II
Supporting Member II
Posts: 9
Joined: 12:18 am Feb 25 2018
Country: United States
Location: Mars, Pennsylvania (Yes, it's a real town!)

Re: IMS Footpegs

Post by Guffer » 01:44 pm Mar 24 2020

I installed the same ones on my '89 last summer with no issues. The springs and pins were also worn out so I purchased new oem's online and everything fit fine. Sounds like your springs are stretched/elongated (if that's the right term?).
1989 kdx200

spl383
Supporting Member I
Supporting Member I
Posts: 134
Joined: 06:05 am Apr 02 2013
Country: United States
Location: Carrollton, TX

Re: IMS Footpegs

Post by spl383 » 03:41 pm Mar 24 2020

I had to bend the springs to get them to fit.

User avatar
VTMTcowboy
Gold Member
Gold Member
Posts: 361
Joined: 07:50 pm May 26 2017
Country: USA

Re: IMS Footpegs

Post by VTMTcowboy » 12:22 am Apr 08 2020

I had a similar problem on my H series with the IMS pro series pegs. Other forum members had them mount up with no problem, but I had to drill out the spring holes to a bit larger diameter and then also bend the spring straight. On the left foot peg I had to grind down some of the metal where the peg mounts to the frame. It was a process but definitely worth it!
1997 KDX 220
2004 KDX 200

bigdhusker
Member
Posts: 13
Joined: 05:17 am Mar 01 2018
Country: United States

Re: IMS Footpegs

Post by bigdhusker » 11:51 am Apr 09 2020

I ordered new springs from RMATV and they worked with no problems!

Post Reply