I picked up my 2000 KX125 Saturday and am starting to map out what I'll need to do for my conversion. I'd like to strip it all the way down and replace all the bearings/seals in the chassis and suspension. Any recommendations for supplier? All Balls? Pivot Works? Other?
Also, for those who've completed this build before, is there an alternate bearing setup used once the swing arm is narrowed or do the stock size KX125 units work?
Thanks!
Chassis/Susp. bearings
-
- Supporting Member I
- Posts: 49
- Joined: 05:58 pm Nov 18 2004
- Country:
- Location: Rodeo, CA
Chassis/Susp. bearings
Michael
00'/01' KX/KDX220R Hybrid
Fredette porting, RB AS carb & RB head, Wiseco, DFIII, Gnarly Rev, TC2, Smart Performance susp.
Mmm... Dirt...
00'/01' KX/KDX220R Hybrid
Fredette porting, RB AS carb & RB head, Wiseco, DFIII, Gnarly Rev, TC2, Smart Performance susp.
Mmm... Dirt...
-
- Supporting Member I
- Posts: 49
- Joined: 05:58 pm Nov 18 2004
- Country:
- Location: Rodeo, CA