Page 1 of 1
YZ250f-KDX Hybrid
Posted: 08:53 am Sep 01 2019
by Gixxer340
Has anyone ever tried a YZ250f-KDX hybrid? I have a 2006 YZ250f with a bad motor (bottom end Shredded) and was trying to figure out what to do with the chassis. The bike is in really good condition, other than the engine, and I love my KDX. Got me to thinking, could I shoehorn a KDX motor into the YZ frame? Seems like it would be a great combination.
Anyway, if anyone has tried this, and either succeeded or failed, please let me know.
Thanks
Jeff
Re: YZ250f-KDX Hybrid
Posted: 01:31 pm Sep 01 2019
by kdxsully
Gixxer340 wrote: ↑08:53 am Sep 01 2019
Has anyone ever tried a YZ250f-KDX hybrid? I have a 2006 YZ250f with a bad motor (bottom end Shredded) and was trying to figure out what to do with the chassis. The bike is in really good condition, other than the engine, and I love my KDX. Got me to thinking, could I shoehorn a KDX motor into the YZ frame? Seems like it would be a great combination.
Anyway, if anyone has tried this, and either succeeded or failed, please let me know.
Thanks
Jeff
It’s probable if you can weld.
Re: YZ250f-KDX Hybrid
Posted: 06:06 pm Sep 04 2019
by bufftester
Could be done, but will require lots of welding/fabrication as the cradle on the YZF splits too low to fit the KDX pipe. It has been done with a RMZ frame I believe, search the hybrid forum for RMZ, KXF to see.
Re: YZ250f-KDX Hybrid
Posted: 07:02 pm Sep 04 2019
by SS109
Yes, it can be done. Plenty of welding will be required.