Carb mods from rb?

Questions and Answers about the best carb and Head mods available for the KDX.
Post Reply
Jasper
Member
Posts: 66
Joined: 04:16 pm Feb 19 2016
Country: Belgium

Carb mods from rb?

Post by Jasper »

Hello
Can someone tell me what the carb mods are that rb does to a carb from a 91 kdx?
I'm from belgium so its crazy to send my carb
But i want to know what he does with the carb so that i can look for someone that could do the "same" work
Pictures are also very welcome
User avatar
bufftester
Platinum Member
Platinum Member
Posts: 3455
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA

Re: Carb mods from rb?

Post by bufftester »

RB Designs website explains it all
Jasper
Member
Posts: 66
Joined: 04:16 pm Feb 19 2016
Country: Belgium

Re: Carb mods from rb?

Post by Jasper »

Ok but what do they do with the slide, jetblock,...
User avatar
bufftester
Platinum Member
Platinum Member
Posts: 3455
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA

Re: Carb mods from rb?

Post by bufftester »

They clearance the slide so it works with the divider plate as far as I could tell looking at mine. The jetblock work is all internal, so not sure what they do there, I would guess maybe polishing and clearancing the air passages similar to when you polish a port job in a motor. The 2 big things are boring the carb and installing the plate. Those two things alone should be able to be done by most machine shops and make the biggest difference. If I was looking for an outside source thats what I would do and not worry about the jetblcok stuff.
Post Reply