KLX Triple Clamp Stops Photo

Questions and comments about converting to beefier forks..
Post Reply
User avatar
VTMTcowboy
Gold Member
Gold Member
Posts: 493
Joined: 07:50 pm May 26 2017
Country: USA

KLX Triple Clamp Stops Photo

Post by VTMTcowboy » 12:21 pm Apr 27 2021

I finally took a photo of my DIY triple clamp stops for a KLX fork swap. After the first couple rides I noticed that the triples were etching into the tank, so after consulting some of you guys here on the forum, this is the result. I drilled and tapped the original stops, then used blue lock-tite to hold the small screws in place. It seems to do the trick. Hopefully this helps out someone else that has or will have the same question. Take care.
kdxforkstops.jpg
kdxforkstops.jpg (56.04 KiB) Viewed 89 times
1997 KDX 220
2004 KDX 200

User avatar
Slick_Nick
Supporting Member
Posts: 1016
Joined: 10:06 pm Oct 22 2009
Country: Canada
Location: Calgary, Alberta
Contact:

Re: KLX Triple Clamp Stops Photo

Post by Slick_Nick » 09:27 am Apr 28 2021

I ended up welding tabs onto mine when I had KLX forks, but this is a great solution for someone without that capability!
'00 KDX 220R

User avatar
GATOROC
Gold Member
Gold Member
Posts: 217
Joined: 12:25 am Mar 06 2019
Country: United States
Location: Colorado Springs, CO

Re: KLX Triple Clamp Stops Photo

Post by GATOROC » 03:00 pm Apr 28 2021

Glad you got the mod done! I did the same thing but used a flat head screw since I only needed a very small amount of clearance, and I only had to do it on one side. A simple idea/fix that I got from the forum here - one of many!
2000 KDX 220
2004 KDX 200

User avatar
VTMTcowboy
Gold Member
Gold Member
Posts: 493
Joined: 07:50 pm May 26 2017
Country: USA

Re: KLX Triple Clamp Stops Photo

Post by VTMTcowboy » 02:04 am Apr 30 2021

Thanks fellas! Hopefully it'll help out the next person with the same question I had. Take care.
1997 KDX 220
2004 KDX 200

Post Reply